///////// for sale b-series tri-y header. 4-2-1 2.5 colector modified ebay header
Thread Starter
Joined: Aug 2002
Posts: 16,062
Likes: 0
From: Bay Area Strong, ca
///////// for sale b-series tri-y header. 4-2-1 2.5 colector modified ebay header
if you guys were keeping up with the allmotor forums. this is the f1spec defective header that didn't pass their quality control. this was suppose to be the sale of the century as some people have said compared to the hytech tri-y header
this is the thread
https://honda-tech.com/zerothread?id=1912532
i have modfied all these to fit the head now..
as you can see
[
it even came with a free gasket cool
after taking it out of the box to see what the hype about these not fitting i had to check it out my self.
i put the gasket it came with ,to align all the holes to the flange.
and notice it was only off a lil
but it had some nice nice ports when i was looking at it at the flange
and the welds looked pretty nice.
so this is what i whooped out to solve the problem.
a drill and a drill bit muahahhaha
time to destroy
i just got bigger drill bit that was bigger than the hole on the header.
and unstead of redrill some of them and testing it out i just redrilled all of them
lol
While trying to redrill it , it was really hard to hold on to while my friend was taking pictures.
so we ended up fabbing alil thing to hold the header up with out damaging it,
The solute before i drill the expletive out of it..
this is how it was held up on the stand
and then the drilling
it took around 9 drills. and the process took around 1hr . that flange was hella strong.
drill 1
drill 2
drill 3
drill4
drill 5
drill 6
drill 7
drill 8
drill 9
these are the size of the hole differences
and everything redrilled
Now to test if it lines up with the gasket
booyeah it lines up =D
and last but not least it bolted it on my built motor that will be going to put in my car
<FONT SIZE="7">Asking for 400 shipped</FONT>
this is the thread
https://honda-tech.com/zerothread?id=1912532
i have modfied all these to fit the head now..
as you can see
[
it even came with a free gasket cool
after taking it out of the box to see what the hype about these not fitting i had to check it out my self.
i put the gasket it came with ,to align all the holes to the flange.
and notice it was only off a lil
but it had some nice nice ports when i was looking at it at the flange
and the welds looked pretty nice.
so this is what i whooped out to solve the problem.
a drill and a drill bit muahahhaha
time to destroy
i just got bigger drill bit that was bigger than the hole on the header.
and unstead of redrill some of them and testing it out i just redrilled all of them
lol
While trying to redrill it , it was really hard to hold on to while my friend was taking pictures.
so we ended up fabbing alil thing to hold the header up with out damaging it,
The solute before i drill the expletive out of it..
this is how it was held up on the stand
and then the drilling
it took around 9 drills. and the process took around 1hr . that flange was hella strong.
drill 1
drill 2
drill 3
drill4
drill 5
drill 6
drill 7
drill 8
drill 9
these are the size of the hole differences
and everything redrilled
Now to test if it lines up with the gasket
booyeah it lines up =D
and last but not least it bolted it on my built motor that will be going to put in my car
<FONT SIZE="7">Asking for 400 shipped</FONT>
Trending Topics
Honda-Tech Member
Joined: Jan 2007
Posts: 3,951
Likes: 0
From: atlanta, ga, usa
Re: (sublimnal)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sublimnal »</TD></TR><TR><TD CLASS="quote">sorry that part you need to port out. but i dont' think you'l;l lose tha tmuch hp from that . but u can always use a dremel to port it out.
</TD></TR></TABLE>
is their enough material to port? is the extra on the primary or the flange?
They look great btw
</TD></TR></TABLE>
is their enough material to port? is the extra on the primary or the flange?
They look great btw
Thread Starter
Joined: Aug 2002
Posts: 16,062
Likes: 0
From: Bay Area Strong, ca
Re: (IT GUY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IT GUY »</TD></TR><TR><TD CLASS="quote">is their enough material to port? is the extra on the primary or the flange?
They look great btw </TD></TR></TABLE>
yes there is engouh material to port this out..
and i only got 3 more guys first come first serve. and i believe i sell this cheaper than anyone else
They look great btw
</TD></TR></TABLE>yes there is engouh material to port this out..
and i only got 3 more guys first come first serve. and i believe i sell this cheaper than anyone else
Thread Starter
Joined: Aug 2002
Posts: 16,062
Likes: 0
From: Bay Area Strong, ca
Re: (:Andrew)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HerminShS »</TD></TR><TR><TD CLASS="quote">Damm, I'm short by $100</TD></TR></TABLE>
make 100 bucks quick
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by :Andrew »</TD></TR><TR><TD CLASS="quote">good job how many do you have?</TD></TR></TABLE>
2 more guys
first come first serve
AND I WIL LONLY SHIP OUT TO CONFIRMED ADDRESSES
make 100 bucks quick
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by :Andrew »</TD></TR><TR><TD CLASS="quote">good job how many do you have?</TD></TR></TABLE>
2 more guys
first come first serve
AND I WIL LONLY SHIP OUT TO CONFIRMED ADDRESSES