CTR 5 Lug Conversion *Socal*
Trending Topics
Honda-Tech Member
iTrader: (2)
Joined: Oct 2004
Posts: 691
Likes: 0
From: Simi Valley, Ca, United States
Re: CTR 5 Lug Conversion *Socal* (Stationwagon)
dosnt look like it, but is it an abs 5 lug?
I have a 5 lug, but the rear hubs are bent. so i need a new set - mine are abs equipped, do you know if I can just swap sensors etc. or is it a completely diff part? Let me know cuz ill come pick em up this week.
thank you
I have a 5 lug, but the rear hubs are bent. so i need a new set - mine are abs equipped, do you know if I can just swap sensors etc. or is it a completely diff part? Let me know cuz ill come pick em up this week.
thank you
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Sep 2004
Posts: 817
Likes: 0
From: Socal, Mexico
i believe these are abs equipped, but i'm not 100% sure, they came off a 2000 Ek9. you can check them out in person to see if its what you're looking for.
i'm sure these will work for a dc but you just need itr lca's, if i'm not mistaken. someone correct me if i'm wrong.
pm's replied!
i'm sure these will work for a dc but you just need itr lca's, if i'm not mistaken. someone correct me if i'm wrong.
pm's replied!
Re: (Stationwagon)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stationwagon »</TD></TR><TR><TD CLASS="quote">i believe these are abs equipped, but i'm not 100% sure, they came off a 2000 Ek9. you can check them out in person to see if its what you're looking for.
i'm sure these will work for a dc but you just need itr lca's, if i'm not mistaken. someone correct me if i'm wrong.
pm's replied!</TD></TR></TABLE>ABS equiped will shows ABS sensors running along the front knuckles with the sensors mounted to the bottom end of the knucle facing down at the axle. The none ABS Equiped suspension don't have holes for you to mount the sensors even though you want to swap the sensores over
Hope this help.
i'm sure these will work for a dc but you just need itr lca's, if i'm not mistaken. someone correct me if i'm wrong.
pm's replied!</TD></TR></TABLE>ABS equiped will shows ABS sensors running along the front knuckles with the sensors mounted to the bottom end of the knucle facing down at the axle. The none ABS Equiped suspension don't have holes for you to mount the sensors even though you want to swap the sensores over
Hope this help.
Honda-Tech Member
iTrader: (2)
Joined: Oct 2004
Posts: 691
Likes: 0
From: Simi Valley, Ca, United States
Re: CTR 5 Lug Conversion *Socal* (EkJavi)
hey can you look at the rears and see if there is a hole to mount the abs sensor to?
if there is ill come pick em this weekend. thanks
if there is ill come pick em this weekend. thanks