first off i'de like to say that i searched and searched and searched.i own a 90 crx si. i might be picking a d-series 4-1 dc header for my sohc zc. the header originaly came of a z6. i know the header with fit on the head, just curious if it will clear my crossmember? i know b-series has clearance issues with a 4-1 header due to first hand knowledge with my old hatch, but havent heard anything about d-series. any info on this matter will be thankfull

 

yes, it will clear the crossmember - the 92-95 header on the ED/EF car will hang down slightly lower than the 88-91 header would

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jlicrx &raquo;</TD></TR><TR><TD CLASS="quote">yes, it will clear the crossmember - the 92-95 header on the ED/EF car will hang down slightly lower than the 88-91 header would</TD></TR></TABLE> That's a big negative my friend, the block heights are the same, so it still tucks in at the same point.

 

thank you both for your input. all i'm concerned about is the cross member clearance.