Anyone have any suggestions where I can get an Si front lip for my 90 dx hatchy? or know of any other lips? ive done searches but found nothing except passwordjdm, but i got a usdm front end and i dont want jdm parts. i live on an island and ive been to every JY here with no luck. if you know any canadian parts dealers that would be good too. im calling hondacity tomorrow, but im skeptical that they will offer any sort of a deal, since they once quoted me $253 for an O2 sensor... wow eh. hah. Thanks guys!
Dan

 

Some honda dealerships still sell new si lips if you're lucky. I've seen some for sale on ebay sometimes as well. Its sad that there isnt realy much for aftermarket front lips for our cars. Theres write ups on VW lips and such and alot of ppl use first gen integra lips

 

true about the integra lip, i just think they look sorta ugly. ive seen some pics of the VW swap, not bad. im gonna look into it more. im gonna do an accord lip on the rear when i get the si lip. its very annoying. any other ideas>

 

http://www.hondaautomotivepart...UMPER

 

https://honda-tech.com/zerothread?id=1831650

and heres a pic of my car with a first gen lip

http://img182.imageshack.us/im...8.jpg

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89_Mangina_SI &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=1831650

and heres a pic of my car with a first gen lip

http://img182.imageshack.us/im...8.jpg</TD></TR></TABLE>
i like it, but your traction bar looks scary ( here kitty, kitty)

 

yours looks real good mangina, u have to cut out some of the middle? melt it back together with a torch or something?

the teg lip i was thinkin of is this one...


let me know how ya did yours mangina. thanks.

gee i sure wish i could pm....

Dan


Modified by welfarepc at 11:17 PM 12/22/2006

 

it actaully fit perfect.. all i had to do was trim the edges so they were flush with the bumper

 

it was only 2 dollars at the junk yard too

 

hah im gonna check it out. i sware i remember reading only the old school first gen integra lips fit. so just to double check, u got it off a 90-93 tegger? :D i hope so, cuz the JY i usually go to has a few!
Dan

 

no even older than that.. lol old school teggy.. like a 88 or somtin

 

Well, Hondacity wants $70 plus taxes for a new lip... damn those bastards. The pic i posted above has a first gen integra lip on it, i know for sure, because dude down the road as a first gen with the same lip, and ive seen it at JY's before. And your lip mangina, looks totally different. im confused. You sure it was from a first gen, or maybe do you know if it was a special model? either way, i hate honda dealerships. Would any of you spend $70 you dont have on something you want real bad?? heheh
Dan

 

this year integra..............

[img=http://img86.imageshack.us/img86/7117/firstgenintegracp1.th.png]

 

yup thats the same gen as buddy down the road... weird. well im gonna have to keep double checkin the old school tegs then. thanks for the info man.
Dan

 

us jetta lip


1st gen integra front lip modified


i used to run the 94-? accord lip on the front of my old crx, but didnt like the fact that i had to cut like 6 inches outa the center, i also used to run the 90-93 accord lip on the front: that lip is easy to put on....oh and of course i have ran the stock crx si lip

 

my gti i lip i just had to heat corners and bend the last inch over.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by welfarepc &raquo;</TD></TR><TR><TD CLASS="quote">Well, Hondacity wants $70 plus taxes for a new lip... damn those bastards.</TD></TR></TABLE>
$70 CDN? How is that a bad deal?! That's rather good for a new part.

If you think that's a ripoff, you should see how much the original attachment hardware costs . . .

 

VR6 lip!!!



Got mine from ebay, $80CDN shipped... very little modifications to get it to work (you just need to grind off these little tabs that hit the splashguard)

 

password jdm front lip ftw!

 

can you modify the paswordjdm lip to fit the USDM front end?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Squallie &raquo;</TD></TR><TR><TD CLASS="quote">can you modify the paswordjdm lip to fit the USDM front end?</TD></TR></TABLE>
That pic IS a USDM front end. (yes)
Allthough I'm curious, has anyone made it work on a non facelift front end? I'm curious how it would look.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bob_760 &raquo;</TD></TR><TR><TD CLASS="quote">
That pic IS a USDM front end. (yes)
Allthough I'm curious, has anyone made it work on a non facelift front end? I'm curious how it would look.</TD></TR></TABLE>

******* long *** night last night. on my part.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bob_760 &raquo;</TD></TR><TR><TD CLASS="quote">
That pic IS a USDM front end. (yes)
Allthough I'm curious, has anyone made it work on a non facelift front end? I'm curious how it would look.</TD></TR></TABLE> the password lip was a direct fit on my crx... im curious how it would look too on an 88-89 bumper..

 

http://www.roadracegear.com/ita104.asp

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KillSwitch &raquo;</TD></TR><TR><TD CLASS="quote"> im curious how it would look too on an 88-89 bumper..</TD></TR></TABLE>
me too!!! someone do it