I don't know if this should be in the clasifieds...if it is I'm sorry. If the moderators want to move this to the classifieds that's fine. A couple of my friends and I did a group buy on JE pistons and rings. Unfortunately we had some Barney's and flaks So, now we have about 10 sets of extra pistons sitting around. I thought I would pass the savings onto my fellow H-T members since everyone has been so helpful. I've got B18, B16 pistons and H22 pistons. I am willing to sell them really cheap. Cheaper than any place on the net. This totaly legit! I have a bunch of different compression ratios too. I would think 10 sets would go pretty fast.... Just wondering if there was interest... Post here if you have questions or e-mail me at ludex9@yahoo.com. Thanks

 

I may be interested. One thing, I will not know for sure until the end of the month. I have no money and my daily driver just went doodoo.

 

one of my buddies wants to know if you have 9:1 comp h23a ones, i think 20 over bore.

 

Doodoo, I don't how long these pistons will be around for. But if you get cash e-mail me and I'll tell you what I have left.

 

Gude let me check. I might have one...dunno..I think I have mostly B18 stuff and a couple H22...I'll check though


[Modified by Sushi X, 11:48 AM 5/8/2002]

 

interesting, do you have any 89mm pistons for the H22A? If so, what CR's?

 

I'll have to check...I'll let you know later today

 

What prices are we looking at?

 

Below $450 shipped for B18 pistons. If you find a better price. I'll beat it. I need to get rid of these things and gets some $ back. H22's will be a little more. All pistons are brand new and in the box


[Modified by Sushi X, 7:10 PM 5/8/2002]

 

Gude I don't have any 89mm pistons, but I do have some 87mm 9:1 pistons....

 

What compression ratios are available for a b16?

 

Why don't you post a list of what you have available? I know i'm interested abut wouod like to have a look at what's available. I might be down for more than one set if I see something I like.

 

anything for an 84-85mm bore in b-series? What compression ratio?

 

I'll post a list as soon as I get the chance.

 

Any High comp pistons for b18s ?

 

I am interested in 9:1 or 9.5:1 pistons for a B18C in stock (81mm) bore - if you have them let me know ASAP please!

 

Here is the list of stuff have and prices.

H23A stock bore and .5mm oversize 9:1 and 10.5:1 $485 shipped
H22A stock bore and .5mm oversize 9:1 and 10.5:1 $485 shipped
B18C (GSR) stock bore and .5mm oversize 9:1 and 9.8:1 $485 for 9:1 and
$450 for 9.8:1 (B16's and B18/B16 hybrids subtract .4 from CR for this
piston)

Allprices include rings and shipping. Pistons are brand new guaranteed As for the qty I didn't really count how many I had of each so, when they are gone they are gone. I know I have more of the B18 9:1 than anything else. Hope this helps.

 

I will do my best...I need 84.5 for my new LS project.

 

I don't think I have any LS pistons but I can check

 

i hate jumping on on peoples posts but I need to get rid of a pair and Im also from Chicago.

I have a set of 81.5 (20 over) In a B16 they produce a 9.2 to 9.3 - 1 (custom size) in a B18c they produce a 10.2 to 1. I will go along with these dudes prices cause they sound fair. 480 + shipping. I only have one set they come with pistons, rings, pins and everything else you need. BRAND NEW IN THE BOX.

I also have a set ( 1 set only) of b16 CROWER RODS with STUDS. These are used with 500 miles on them. When you get them pressed you need to get new ring sleeves put in (8-10 bucks a rod) . I will let these go for 450 plus shipping. YOU WILL SAVE A TON THIS WAY.

my email is rayk83@yahoo.com

mods if you feel you need to move this go ahead and I will appoligize now. = (. Just trying to hookup everyone with a deal.

 

Sorry those are custom pistons which I don't have. I was personnaly going to go that size as well, but settled for stock diameter.... Sorry. Let me know if you want the stock size. I have a few

 

I'm getting a bunch of questions about the pistons, but no one seems to want to buy.... This is a legit deal. Turbo T can back me on this. He has seen what I have first hand.

 

you dont have any piston for LS?

 

I think I may have one or two. What size and compression are you looking for????

 

I am not sure, I am looking to turbo charge the block with no vtec.