01 Kaiser Silver Metallic K20A2 Swapped ITR Track ready!!! Michigan
Thread Starter
Joined: May 2004
Posts: 684
Likes: 0
From: VTECing, mi, us
01 Kaiser Silver Metallic K20A2 Swapped ITR Track ready!!! MI *LOWER PRICE*
******SOLD******
It's time for my ITR to find a new owner so I can lower my bills. This is a 2001 Acura Integra Type R #940. I bought it back in May of 04 and I'm the second owner. The paint change was due to a 5 year old scratching the stock paint so I decided to go with a new color. Just this past May I had a K20A2 installed by Suja 1 Motoring in Carol Stream Il. The swap was done very well and it's a very clean swap. The car has now 71000 miles on the chassis but the motor has very low millage. I've only put 6500 miles on this swap and I hate to let the car go but reducing my debt is more important. Here's the lowdown..
01 Acura Integra Type R
EXTERIOR
Kasier Silver Metallic Paintjob
Usual Highway rockchips
E46 Hid Retrofit
OEM Optional Sides
Overall Exterior would be 8.5 out of 10 (due to a rock chip on the passenger quarter that chipped some clear off and the GSR hatch glass(Glass place had a GSR glass in stock but not Type R so since it was a few days before EXPO I had that one installed instead))
INTERIOR
Rear Seat has been removed (been sold)
AutoPower Rollbar w/padding
GSR Passenger Seat
Corbeau Drivers Seat (will replace with another GSR seat when sold)
R Crew Shift Plate (for K20 shftbox)
Overall Interior is a 8.5 out of 10 (due to lack of full interior and the gouge in the drivers door panel from the Corbeau seat).
ENGINE AND SUSPENSION
K20A2 from a rear ended 02 RSX Type S
RBC Intake manifold from a 06 Si
STR Fuel Rail
Suja 1 Custom Clutch and Fuel lines
Generic Short Ram intake
Koyo RSX Radiator with Tabata Radiator Cap
2 Thin Fal Pusher Fans
Gator Stage 2 Axles
Hasport Mounts
Kteller 2.5 in piping
Blued turndown tip muffler
TUNED KPRO by Suja 1. I made 216 whp and 150 ft lbs of torque..
Apex'i 99 Spec Coilovers
T1R Front Camber Kit
Ingals Rear Camber Kit
NSX Calipers (Carbotech XP 10s front Panther Plus for the rear)
TechnaFit Brake Lines
Mazda Millenia Wheels (Hankook 404 Winter Tire)
Prelude SH Wheels (Falken Azenis 615's)
Here are the pictures
Here's the map from a dyno meet last weekend. The air fuel we believe is off since a guy with a Camaro SS had a Inovate air fuel meter in his car and he was reading about a point lower air fuel compared to the Dynojet. So I think with a little adjustment someone could squeeze a little more out of this engine.
Well people I have decided to cut this price one last time. I have put 81,XXX since I have created this thread and have changed the exhaust and now for the good stuff. I'm willing to part with this car for 12000 or 11500 if you bring me a check by this friday. I have to get this car to a new owner, someone who will appreciate it as much as I did so I can move out and go to college.
Modified by nemesis0104 at 1:33 PM 7/10/2007
Modified by nemesis0104 at 1:45 PM 7/10/2007
Modified by nemesis0104 at 6:26 PM 7/20/2007
It's time for my ITR to find a new owner so I can lower my bills. This is a 2001 Acura Integra Type R #940. I bought it back in May of 04 and I'm the second owner. The paint change was due to a 5 year old scratching the stock paint so I decided to go with a new color. Just this past May I had a K20A2 installed by Suja 1 Motoring in Carol Stream Il. The swap was done very well and it's a very clean swap. The car has now 71000 miles on the chassis but the motor has very low millage. I've only put 6500 miles on this swap and I hate to let the car go but reducing my debt is more important. Here's the lowdown..
01 Acura Integra Type R
EXTERIOR
Kasier Silver Metallic Paintjob
Usual Highway rockchips
E46 Hid Retrofit
OEM Optional Sides
Overall Exterior would be 8.5 out of 10 (due to a rock chip on the passenger quarter that chipped some clear off and the GSR hatch glass(Glass place had a GSR glass in stock but not Type R so since it was a few days before EXPO I had that one installed instead))
INTERIOR
Rear Seat has been removed (been sold)
AutoPower Rollbar w/padding
GSR Passenger Seat
Corbeau Drivers Seat (will replace with another GSR seat when sold)
R Crew Shift Plate (for K20 shftbox)
Overall Interior is a 8.5 out of 10 (due to lack of full interior and the gouge in the drivers door panel from the Corbeau seat).
ENGINE AND SUSPENSION
K20A2 from a rear ended 02 RSX Type S
RBC Intake manifold from a 06 Si
STR Fuel Rail
Suja 1 Custom Clutch and Fuel lines
Generic Short Ram intake
Koyo RSX Radiator with Tabata Radiator Cap
2 Thin Fal Pusher Fans
Gator Stage 2 Axles
Hasport Mounts
Kteller 2.5 in piping
Blued turndown tip muffler
TUNED KPRO by Suja 1. I made 216 whp and 150 ft lbs of torque..
Apex'i 99 Spec Coilovers
T1R Front Camber Kit
Ingals Rear Camber Kit
NSX Calipers (Carbotech XP 10s front Panther Plus for the rear)
TechnaFit Brake Lines
Mazda Millenia Wheels (Hankook 404 Winter Tire)
Prelude SH Wheels (Falken Azenis 615's)
Here are the pictures
Here's the map from a dyno meet last weekend. The air fuel we believe is off since a guy with a Camaro SS had a Inovate air fuel meter in his car and he was reading about a point lower air fuel compared to the Dynojet. So I think with a little adjustment someone could squeeze a little more out of this engine.
Well people I have decided to cut this price one last time. I have put 81,XXX since I have created this thread and have changed the exhaust and now for the good stuff. I'm willing to part with this car for 12000 or 11500 if you bring me a check by this friday. I have to get this car to a new owner, someone who will appreciate it as much as I did so I can move out and go to college.
Modified by nemesis0104 at 1:33 PM 7/10/2007
Modified by nemesis0104 at 1:45 PM 7/10/2007
Modified by nemesis0104 at 6:26 PM 7/20/2007
good luck on the sale buddie 
Thread Starter
Joined: May 2004
Posts: 684
Likes: 0
From: VTECing, mi, us
Re: (JDM EJ1 95)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM EJ1 95 »</TD></TR><TR><TD CLASS="quote">bump for this thing.. i think it was at the suja1 meet?</TD></TR></TABLE>
Yes sir, it was there....
Yes sir, it was there....
Trending Topics
Thread Starter
Joined: May 2004
Posts: 684
Likes: 0
From: VTECing, mi, us
Re: 01 Kaiser Silver Metallic K20A2 Swapped ITR Track ready!!! Michigan (macDelli)
Just got back from a Dyno Meet. I laid down 216 whp and 150 ft on tweaked version of the K20A2 modified map that comes with the K Manager. I'll post the dyno graph later....Bump for some K20 powa!!!
Honda-Tech Member
Joined: Mar 2002
Posts: 2,199
Likes: 0
From: Somewhere in MI
Re: 01 Kaiser Silver Metallic K20A2 Swapped ITR Track ready!!! Michigan (nemesis0104)
Bumpity for Tony's sick ITR.
I remembered when you picked this bish up and a few months later I got my first R.
I can vouch this car is great.
I remembered when you picked this bish up and a few months later I got my first R.
I can vouch this car is great.
