Here are some pictures of a B16 build up that my buddy Huy(crx=si) has been working on. All of the labor and fabrication was done by Huy. I'll let Huy post all the specs...its 3am and I don't remember them all...

There is a Hytech header in one of the pictures...it was not used on this car. The header used was made by Huy.

Preliminary HP numbers are in the 240s.



















Modified by 20lbbooster at 4:07 AM 10/15/2006


Modified by 20lbbooster at 4:19 PM 10/15/2006

 

Got any ET's? Videos?

 

Track tomorrow if it doesn't rain...

 

more info on your setup if u can. nice build love your avatar also! that beer is not for the faint of heart.

 

86mm 13.5:1 custom supertech pistons
89mm balanced LS crank
golden eagle sleeves
maxlight B16a Manley rods
supertech valvetrain
crane roller rockers/ roller cams
440 RC
TWM ITB
ported the head by me
header by me
tuned on Crome by me
4.9 ATS
tilton twin discs

that's all I can think for now, power in the 240s whp, I'll find the dyno graph, very conservative tuned, mixture still in the mid 12s with 110 gas (probably change to lower octane on the next tune), something is not right, power should be higher than my old 84 x 89 b16 setup, I just need to figure it out, I'm too tire, it's 3AM @ Stoopidfast dyno

 

 

Wow!

 

Nice. Not too many people running that cam and rocker setup. How is the idle? I would love to see the graph for that motor

 

short video of the car on dyno

http://www.we-todd-did-racing....5NTQx

 

sh*t that will be a serious monster

 

Great craftsmanship, it will be a force to be reckoned with

 

went to the track, made a couple shake down passes, first pass the car started to miss fire, let off after the 60' mark, cut 1.72 60', changed to some slightly hotter plugs, ran 11.7 @ 117mph bouncing rev limitter spinning into 2nd gear, cut 1.8 60', tried to make the 3rd pass but the engine have a little oil leak from the oil pressure switch , decided to call it a night.......this coming sunday, I'll try to cut some low 1.6 60' and hope for
11.3 -11.5, my buddy will post the vid shortly

 

go here for the video...

http://www.houston-imports.com...37283

 

thats a monster

 

wow

 

looks sick did you fabricate the traction bar also? and any idea what the car wieghs?

 

yeah, he made that traction bar too. All the fabrication and labor was done 100% in house.

The car weighs in at 1950lbs with driver.

 

what kind of ignition timing are you guys running?

 

sick build!

 

wow! impressive build man!

post up a dyno sheet when u get a chance.

 

for a b16 owner thats some inspiering ****!!!

 

VERY VERY NICE!

 

incredible.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black cx &raquo;</TD></TR><TR><TD CLASS="quote">thats a monster</TD></TR></TABLE>

 

crazy b16