Modified by redboost10 at 8:36 PM 1/8/2007

 

Looks really good so far. What do you have planned for her next?

 

Holy **** man, your setup is no joke. Good luck with it.

 

well i get the head back hopefully this weekend, so after Scott (hotrodteg) drops the head on the block, i will drop the engine in the car and go from there, this weekend i just got done relocating the brake lines so they dont make the firewall look so clustered behind the intake

thank you daveG, trying to do things right this time around, still debating on the cams after i test the gsr ones, but for sure i will do some dyno pulls on the gsrs and then not sure what i will put in there but it will be something

 

awesome build man. Good luck.

 

thank you sir

 

Cant wait to see this at the track!

 

very very sick setup. when do you plan on having it finished?

 

thank you guys, i cant wait to get it to the track,

well, haha, im 21, in school so obviously money is an issue, but like mentioned all i need to "buy" is the axle system, and engine management stuff which is roughly 5-6k. im going to try to have it ready for the start of next season, but for sure by the time summer comes around, ill have some numbers. damn, now that i say that, thats like 9 months away. ouch

 

still waiting on boostedcivicsir to tell me how his gsr vs. mazworx dyno test went .

 

who did the cage?

 

jim caughlin, superstock racer in division 6, did the roll bar about two years ago, and i added the cage part on to it like 3 weeks ago

 

looks good thus far... keep us posted!!

 

Am I going crazy? I not see the D bars from the shoulder harness bar down towards the "shifter tunnel."

Other than that, looks good.

Jason

 

holy ****, such a dumbass, i totally forgot about the d-bars, damnitt, the other night, after i intalled my carpet, i was wondering, why it looked so clean in that area.

thanks jason, hopefully get that done this weekend

 

shouldnt the cage shop know what bars you need? I didn't have to explain to our fab shop what bars go where

 

haha, i was the cage shop, i have the rulebook sitting out in my garage, just totally forgot about the d-bars, oh well, no biggie, good thing i posted pics of it before got any further. thank you jason


Modified by redboost10 at 8:13 AM 10/3/2006

 

Looks like a great set-up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redboost10 &raquo;</TD></TR><TR><TD CLASS="quote">

the car</TD></TR></TABLE>

just wondering, what IC is that?

 

thank you

that ic is from phoenix turbo,its a pwr intercooler

 

i bought that when phoenix turbo was cheapturbo.com, haha,

 

im pretty sure now you have to have a bar across the main hoop and connect the d bars to that and not the floor

 

ill ask the tech in my area

 

i think if the flooring is just single walled, the plates can be bolted (using 4 bolts) on to the floor, but if its a double walled floor, like it is near the firewall area, then it needs to be welded.

 

I hope your not planning on taking out the AC! =p