JDM Front, rollbar'd, new motor, custom painted TEG in TX
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
JDM Front, rollbar'd, new motor, custom painted TEG in TX
CAR IS SOLD!!!!!!!!
94 Integra LS
Everything is practically brand new. Thanks for looking and feel free to PM me with any questions.
This car has to go. First $9000 takes it. $8600 w/out wheels or $8300 without wheels and rollbar
My LS-turbo 4-door is also for sale in this thread http://hondamarketplace.com/zerothread/1583941
Motor
91 b18a1
Completely disassembled, cleaned, inspected, and reassembled.
Hasting Rings
ACL bearings
Stock Headgasket
All new gaskets etc
Walbro 255 fuel pump
Aem Intake (short ram)
Tanabe G-Power Medallion exhaust with test pipe
GSR Tranny just rebuilt
ACT Extreme Pressure Plate
ACT 6-puck unsprung disc
The whole swap including motor and tranny have around 4000 miles on it since the rebuild. The car runs hard as hell for an LS
Interior
Kirk 4-point roll bar
Mint GSR interior (black)
Factory CD player
Nice Alpine speakers all the way around
Badass Viper alarm with pager, multiple sirens, and kill switches
Greddy Shift ****
Exterior
JDM OEM sheetmetal Front
Whole car painted Silverstone Metallic with custom clear.
Shaved side moldings (welded not just filled)
Shaved trunk
98+ Rear bumber
Rota Slipstreams (black) 16x7 w/205-45-16 Parada spec2's
Suspension
Skunk2 Coilovers
Extended strut tops
Ingall's Camber kit up front
Energy suspension inserts on Torque mounts
Type R sway bars
FLAWS: The rear was barely tapped on the passenger rear where the garnish piece meets the quarter panel. The garnish piece has been replaced but not repainted. The quarter panel has a small indention that will cost $130 to fix. Look at the last pic for reference
VIN will be furnished to serious buyers. Thanks again for looking
Modified by JDMH22HATCH at 9:05 PM 10/16/2006
94 Integra LS
Everything is practically brand new. Thanks for looking and feel free to PM me with any questions.
This car has to go. First $9000 takes it. $8600 w/out wheels or $8300 without wheels and rollbar
My LS-turbo 4-door is also for sale in this thread http://hondamarketplace.com/zerothread/1583941
Motor
91 b18a1
Completely disassembled, cleaned, inspected, and reassembled.
Hasting Rings
ACL bearings
Stock Headgasket
All new gaskets etc
Walbro 255 fuel pump
Aem Intake (short ram)
Tanabe G-Power Medallion exhaust with test pipe
GSR Tranny just rebuilt
ACT Extreme Pressure Plate
ACT 6-puck unsprung disc
The whole swap including motor and tranny have around 4000 miles on it since the rebuild. The car runs hard as hell for an LS
Interior
Kirk 4-point roll bar
Mint GSR interior (black)
Factory CD player
Nice Alpine speakers all the way around
Badass Viper alarm with pager, multiple sirens, and kill switches
Greddy Shift ****
Exterior
JDM OEM sheetmetal Front
Whole car painted Silverstone Metallic with custom clear.
Shaved side moldings (welded not just filled)
Shaved trunk
98+ Rear bumber
Rota Slipstreams (black) 16x7 w/205-45-16 Parada spec2's
Suspension
Skunk2 Coilovers
Extended strut tops
Ingall's Camber kit up front
Energy suspension inserts on Torque mounts
Type R sway bars
FLAWS: The rear was barely tapped on the passenger rear where the garnish piece meets the quarter panel. The garnish piece has been replaced but not repainted. The quarter panel has a small indention that will cost $130 to fix. Look at the last pic for reference
VIN will be furnished to serious buyers. Thanks again for looking
Modified by JDMH22HATCH at 9:05 PM 10/16/2006
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Re: JDM Front, rollbar'd, new motor, custom painted TEG in TX (macDelli)
Nice hatch, but I have 2 hatches at home right now 
. Good luck on your sale as well though. I'm just in the need of cash so no trades at the moment. Thanks
. Good luck on your sale as well though. I'm just in the need of cash so no trades at the moment. Thanks
Trending Topics
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Re: JDM Front, rollbar'd, new motor, custom painted TEG in TX (wOrd!)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wOrd! »</TD></TR><TR><TD CLASS="quote">and pictures of the rear? looks like its fucked up?..</TD></TR></TABLE>
Look at the last pic. That is the damage. It got slightly tapped while the car was parked in a parking lot. Somebody pulled in and barely hit it. The only damage is shown in the last picture.
Look at the last pic. That is the damage. It got slightly tapped while the car was parked in a parking lot. Somebody pulled in and barely hit it. The only damage is shown in the last picture.
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Re: (OnePointFive)
I'm sorry, I'm not doing any trades. I just need cash since I have too many cars right not anyhow. Thanks for the offer though and good luck with your sale 
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Re: (JDMH22HATCH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99SlammedCivic »</TD></TR><TR><TD CLASS="quote">Bump for my white brother ! </TD></TR></TABLE>
Thanks Hishie
Thanks Hishie
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Re: (NIKE SB'd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NIKE SB’d »</TD></TR><TR><TD CLASS="quote">wow nice </TD></TR></TABLE>
Thank you
</TD></TR></TABLE>Thank you
