New York City streets suck !!!!!! Look what happened to my RMF "masterpiece" header after falling into a huge pot hole. The next day I had it rewelded and it was fine until those welds reopened. I decided to take it off the car but it was already completely broken into two pieces. If I weren't a grown *** man I would've cried . I don't wanna start another header dilema post but, I can attest that these headers make good power on my motor and the craftsmanship is an incomparable work of art. I'm going to get it rewelded and hopefully this time it will not crack or reopen.

 

why don't you contact Randy and see if he could fix it for you? i'm sure he'd do it for a fair price.

 

Damn bro i know you have got be hurtin,i know that header cost you quite a bit but hopefully it can be fixed,good luck man

 

daaaaamn.. just picture all the $100 bills goin down the toilet

 

you should cut it before the merge and weld a whole new piece on...

 

Oh no dude .What did you do ? LOL I'll PM you.

 

ill bet thats just as painful for randy to look at as it is for the owner.

 

randy this is jason from riverside hit me up?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Combustion Contraption &raquo;</TD></TR><TR><TD CLASS="quote">ill bet thats just as painful for randy to look at as it is for the owner.</TD></TR></TABLE>
LOL Yeah That was Rockets Super Duper header.Thats one of the only 6 polished stainless headers that I have ever done.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RMF &raquo;</TD></TR><TR><TD CLASS="quote"> LOL Yeah That was Rockets Super Duper header.Thats one of the only 6 polished stainless headers that I have ever done.</TD></TR></TABLE>

randy dont ever polish headers againg....i know how much you hate doing it!

 

OMG ,well at least no one can call crappy quility welds... the welds didnt even break .

sorry to hear man .

 

 

owweeeeeeee

 

owweeeeeeee x2.

 

I dont knwo much about this header other than its excellent quality, but does it hang low bc if not that must of been a huge *** pothole?

 

Holy crap! Did you run over a crater?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 &raquo;</TD></TR><TR><TD CLASS="quote">why don't you contact Randy and see if he could fix it for you? i'm sure he'd do it for a fair price.</TD></TR></TABLE>
I already spoke to Randy and he's willing to fix it. Right now he's in the process of moving to another location so I'll ship him the header next week. I'll post pictures of the repaired header once I get it back.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by typerman &raquo;</TD></TR><TR><TD CLASS="quote">Damn bro i know you have got be hurtin,i know that header cost you quite a bit but hopefully it can be fixed,good luck man</TD></TR></TABLE>
More like crying . You gotta pay to play in this sport and good quality parts isn't cheap.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RMF &raquo;</TD></TR><TR><TD CLASS="quote"> Tell me about it ...Everytime I do one I look like Bisi when I get done.</TD></TR></TABLE>
lol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by atg1290 &raquo;</TD></TR><TR><TD CLASS="quote">I dont knwo much about this header other than its excellent quality, but does it hang low bc if not that must of been a huge *** pothole?</TD></TR></TABLE>
This header has excellent ground clearance and doesn't hang lower than the oil pan like most others. It was definitely a huge pot hole that was filled with water. Unfortunately it was in the night this happened and I couldn't see the pot hole ahead of time

 

wow that header is a wrap! nyc, jersey, northeast are just full of potholes one mistake of not dodging a pothole, theres consequences

 

****!!!

 

damn sucks bro.........

 

good customer service from RMF tho

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiB16A &raquo;</TD></TR><TR><TD CLASS="quote">good customer service from RMF tho </TD></TR></TABLE>

hopefully mines will be done soon

 

That looks real nasty

I was thinking RMF was going to offer a 2 piece header lol sorry bout that luck.

 

Yeah i hate potholes im in md and some places are ridiculous....that sucks and i hope everything gts taken care of!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ***-assin &raquo;</TD></TR><TR><TD CLASS="quote">That looks real nasty

I was thinking RMF was going to offer a 2 piece header lol sorry bout that luck.</TD></TR></TABLE>

Randy makes custom headers so, if you're looking specifically for a 2-piece header for your motor you could contact him and find out.