prelude steering wheel install
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 3,693
Likes: 2
From: Raleigh, NC / Kingston, NY
well i installed a 90-91 prelude steering wheel today...
SCROLL DOWN
what i did was, take off the crx si steering wheel, take off the wire and ring for the horn and put that on the back of the prelude steering wheel to have a horn
the con of this though, is that there is a half of an inch of room between the wheel and the wiper/signal arms, so if you have fat fingers do not do this, ive been scraping my fingers on the arms, not to bad though, i like the feel of this wheel and looks more than the stock crx si...
[Modified by crxgator, 1:55 AM 4/28/2002]
SCROLL DOWN
what i did was, take off the crx si steering wheel, take off the wire and ring for the horn and put that on the back of the prelude steering wheel to have a horn
the con of this though, is that there is a half of an inch of room between the wheel and the wiper/signal arms, so if you have fat fingers do not do this, ive been scraping my fingers on the arms, not to bad though, i like the feel of this wheel and looks more than the stock crx si...
[Modified by crxgator, 1:55 AM 4/28/2002]
Yeah, my Integra steering wheel install gave me two little buttons on the wheel that i didnt have before....and one switch on the right i didnt either......hmm....what to use them for....
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 3,693
Likes: 2
From: Raleigh, NC / Kingston, NY
http://community.webshots.com/user/skyline_r34
Check out my NOS thinger, and the steering wheel pics are under CRX
Check out my NOS thinger, and the steering wheel pics are under CRX
Trending Topics
yeh cause i have a 89 si wheel and i had some problems with it today i was like ummm this is tight so i took it off good thing its free im gonna see if i can figure out something with it tomarrow im 6'1" so my knees were hitting it a bit
Thread
Thread Starter
Forum
Replies
Last Post




