Im selling my 93 gs-r that i just got done putting back together. For some reason i have lost interest. The block has about 6k on it, the head has about 300 miles on it. All freshened up over the spring. Doesn't smoke, doesn't burn oil, etc. It has been to the track ONCE! ONCE THATS IT! For a few test passes, nothing serious. Never had the slicks on. Turbo is brand new from PHXturbo. Transmission has about 300 miles on the fresh rebuild as well.All work was professionally done Here is the mod list.

Need to gauge some interest!

LONGBLOCK SOLD

1993 Acura Integra GS-R
Will sell rolling chassis with full suspension, harness, traction bars,cage, fuel, interior, gauges, DR's ready for YOUR management and powertrain for $4000 OBO


Drivetrain Modifications
GSR YS1 Cable Transmission
Gearspeed Carbon Coated Synchros Throughout
New Honda Bearings Throughout
Pops out of 5th sometimes if you dont hold it in.
Wont come with a diff, unless you buy the entire drivetrain setup. (spool etc)
$500

Circuitworx Stage 2 Axle Setup
Circuitworx Stage 2 Drag Spool
Circuitworx Stage 2 Hubs
ARP Wheel Studs
$2000

Exedy Twin Disc Clutch
Big shaft Cable
$1250

Fuel System Modifications
Single Walbro 255lph In-Tank Pump
RC 1000cc Injectors


MSD DIS-4 Ignition $300

Stewart Warner 40psi Boost Gauge
Stewart Warner Water Temperature Gauge
Stewart Warner Oil Pressure Gauge
Moroso Oil Pressure Warning Light
Proform Adjustable Shift Light
All Custom Mounted In Center Vent Space

Chassis Modifications & Safety
Race101 10point Chromoly Roll Cage with Swingout/Removable Door Bars
Stroud Window Net
G-Force 5point Harnesses
Taylor Polished Aluminum Battery Box Relocated To Hatch Area
Battery Cut Off Switch In Hatch Key Hole
Full Custom Chassis Wiring (NO FACTORY WIRING AT ALL!) (Summit 18 circuit universal harness)
Rear Interior Removed
Under Dash Removed (Blower, ducting etc...)
Power Steering Removed
ABS Removed Properly
A/C Removed
Power Seat Belts Removed
Rear Wiper Removed

Suspension and Traction Modifications
13x7" Bogart Pro-4 Drag Wheels with Black Powdercoated Inner
24.5x8.5x13 M&H Slicks
Mickey Thompson Tubes
$750

Skunk2 Coilovers
Skunk2 Adjustable -5/+5 UCA's
Stock Struts
Full-Race Traction Bars
Polished Fat Fives w 235/60/15 MT DOT Drag Radials (street)
Energy Suspension Polyurethane Mount Inserts

Brakes
Brembo Blanks @ All 4
Hawk HP+ Front Brake Pads
Hawk HP Rear Brake Pads

Forced Induction
Autolab Carbon Steel Topmount Manifold Jet Hot Coated
Garrett 24x11.5x3" Bar/Plate Core with Custom Autolab Backdoor Endtanks
Autolab Aluminum Charge Pipe
Tial 50mm BOV
Tial 44mm Wastegate
Polised Compressor Housing
Jet-Hot'd Exhaust Housing
Autolab 3" Stainless Steel Downpipe with Turndown Exhaust
(Autolabonline.com)
$2000 NO TURBO, GATE, OR BOV

T3/T61 .82a/r P-Trim Polished/Coated from PHXturbo $950

Cooling
Dual Core Del Sol Radiator
12" 1400cfm Fan


Street Legal, Street Driven

It needs paint, few dents, new front bumper (lots of rock chips). But i never built it to be pretty. It is purpose built with proven parts.





































Box of ALL the stock wiring....LOLOLOLOL




PM me for vin and asking price if your interested. MIGHT be willing to take trades depending on what you have.


Thanx guys!


Modified by Vtak at 5:31 PM 9/5/2006


Modified by Vtak at 11:35 PM 10/4/2006

 

If you look...please bump!

 

TTT!

 

Bump it up!

 

I likes...alot. Bump for you.

 

Buy buy buy!

 

bump it up..

 

all that and a stock radiator. lol

nice build

 

thank ya

 

Up up and away!

 

mornin bump

 

how much? and how much hp?

B
U
M
P

F
O
R

Y
O
U

 

pmed

i got a clean clean turbo hatch maybe we can work a deal

 

 

PMs replied

 

BUMP FOR A PART OUT

 

still have the autronic??

 

Sorry i haven't gotten back to ya. PM's are better to get me on. But no i sold the autronic a few weeks ago, i DO still have the boost solenoid for it though if you needed one

 

is this the autronic boost sol.

 

Bump for a nice setup!

 

how much for your topmount manifold?

 

still likey!