turbotime

http://cgi.ebay.com/ebaymotors...QrdZ1

dont know if this is a repost but look at that! I know its **** but I might buy it just to throw on a b18 or somethin thats a crazy deal. Manifold aint to shabby either but im gonna bet it needs more reinforcement

b18a1ef9

hah looks nice, but looks like that manifold would hit the radiator or something, nice of them for trying though.

Schister66

T4 + SSAC sidewinder = broken manifold in no time flat

Enzo Speed

Looks shiny. I'd buy it

boostedcivicsir

another sign of the apocalypse.

BillB

I guy local to me has just got one of these kits fitted to his del sol

The manifold puts the turbo so close to hitting the rad that it does with the engine rocking a little when reving it

The top water hose is crushed from under the hose by the turbo as its placed too high

It seems the turbo actually blows out of the intake of the turbo

BillB

Turbocivic94

I got one of these kits on my car and it made 742whp. I supported the manifold so it doesnt crack.

Mugencrxsir1

I would trust everything except for the turbo, and maybe a manifold. But bottom line is this seller might have some better looking parts than SSAC...etc, but this company is a SSAC follower. Give it a try and let us know.

SPOOLINmatt

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BillB &raquo;</TD></TR><TR><TD CLASS="quote">

It seems the turbo actually blows out of the intake of the turbo

BillB</TD></TR></TABLE>

any turbo can do that, particularly, BB turbos because they spin so fast at idle that they are actually compressing air faster than the motor can take in. So it blows back out of the inlet.

turbotime

yup i know about ssac the turbo may suck and the mani may crack but like tha bove guy said, if you make 700whp for $800 bux that aint too shabby atall....

to the guy who said he bought the kit... how the spool?

**** ill just have my buddy go over the welds on the manifold and then brace the turbo and im sure the kit will work just fine.

93supercoupe

I agree

Turbocivic94

full boost by 5200 rpm

DaveF

ahahahahahahhahahhahha


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 &raquo;</TD></TR><TR><TD CLASS="quote">I got one of these kits on my car and it made 742whp. I supported the manifold so it doesnt crack.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 &raquo;</TD></TR><TR><TD CLASS="quote">full boost by 5200 rpm</TD></TR></TABLE>

turbotime

dayum is that turbo BB?

Turbocivic94

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic &raquo;</TD></TR><TR><TD CLASS="quote">ahahahahahahhahahhahha


</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbotime &raquo;</TD></TR><TR><TD CLASS="quote">dayum is that turbo BB?</TD></TR></TABLE>

It has *****

tony1

You can't just "go over the welds" and fix a bad weld. If they aren't backpurged and are welded too hot, then the damage is done, no rewelding can fix it. It will crack, and it will get welded, and it will crack again, and again, and again....

turbotime

turbocivic94- any pics of the setup?

spooncivic1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbotime &raquo;</TD></TR><TR><TD CLASS="quote">turbocivic94- any pics of the setup?</TD></TR></TABLE>

i think he was joking

turbociviccoupe

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbocivic94 &raquo;</TD></TR><TR><TD CLASS="quote">I got one of these kits on my car and it made 742whp. I supported the manifold so it doesnt crack.</TD></TR></TABLE>


would like to see pictures of the set up and a dyno chart...not that i dont believe you...just would like to see.

TurboJesse

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">You can't just "go over the welds" and fix a bad weld. If they aren't backpurged and are welded too hot, then the damage is done, no rewelding can fix it. It will crack, and it will get welded, and it will crack again, and again, and again....</TD></TR></TABLE>

how do you know

I got called an idiot in another thread because everyone thinks you can just re-weld over shitty welds that cracked

nebulight

turbotime

its cheap enough, if i had money i wish i could buy it just to throw on a car to see what it can do [besides fall apart].. yeah i think i missed the sarcasm earlier

Turbocivic94

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbotime &raquo;</TD></TR><TR><TD CLASS="quote">turbocivic94- any pics of the setup?</TD></TR></TABLE>

With little modification this is what I came up with. I had to do little welding

alpha

&lt;Sarcasm&gt;Wow. They are selling Full-Race kits cheap &lt;/Sarcasm&gt;

rudebwoy

iTrader: (1)

I think its time for full-race to have a meeting with their lawer. false advertising, but then again they dont own the term full-race. that sucks! now some ricer is gonna buy it thinking he got full-race kit.