Pictures of the Rage big tube 2.0L header (no 56k)
Thread Starter
Honda-Tech Member
Joined: Mar 2003
Posts: 4,027
Likes: 0
From: Greenville, SC
Pictures of the Rage big tube 2.0L header (no 56k)
Here are some pictures of my new header. Overall, the quality looks to be very good. All of the welds look to be top notch. Fitment was great (although you can not run the tranny brace). I did not get a chance to take pictures of ground clearance before it got too dark outside. I'll let the pictures do the talking...
Honda-Tech Member
Joined: Apr 2006
Posts: 3,959
Likes: 1
From: Buffalo, NY, USA
Re: (94rs-turbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94rs-turbo »</TD></TR><TR><TD CLASS="quote">beautiful! thats all i can say</TD></TR></TABLE>
x2
x2
Honda-Tech Member
Joined: May 2004
Posts: 4,517
Likes: 0
From: DR. 90210, CA, Breast Man
Re: Pictures of the Rage big tube 2.0L header (white rocket)
I have been eyeballing this new header for us 2.0L folks. I just saw a dyno comparo in the all motor forum with this header. Looks like I will have to save up for another header again 
Trending Topics
Honda-Tech Member
Joined: May 2002
Posts: 10,082
Likes: 2
Re: Pictures of the Rage big tube 2.0L header (white rocket)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by white rocket »</TD></TR><TR><TD CLASS="quote">What motivated the change from the ANR to the Rage? Awesome looking piece nonetheless
Edit: oh wait, didn't the ANR crack or something?</TD></TR></TABLE>
now that i think of it. i kinda remember the an r cracked on him
Re: (94rs-turbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94rs-turbo »</TD></TR><TR><TD CLASS="quote">beautiful! thats all i can say</TD></TR></TABLE>
Same here.
Same here.
Honda-Tech Member
Joined: Sep 2004
Posts: 2,878
Likes: 0
From: florida
Re: (Kicker773)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kicker773 »</TD></TR><TR><TD CLASS="quote">how much did that cost you if you dont mind me askn? </TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Mar 2003
Posts: 4,027
Likes: 0
From: Greenville, SC
Re: Pictures of the Rage big tube 2.0L header (itr1244)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr1244 »</TD></TR><TR><TD CLASS="quote">
what happend to your an R again?</TD></TR></TABLE>
I sold the AN-R header because I needed to put a/c and p/s back in the car.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by white rocket »</TD></TR><TR><TD CLASS="quote">didn't the ANR crack or something?</TD></TR></TABLE>
It did crack in the past but I had the header completely re-welded at the flange and that issue was taken care of. The header was fine but no a/c.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Padawan »</TD></TR><TR><TD CLASS="quote">Looks like a nice header. Are those functional cross-over tubes, or just welded braces? </TD></TR></TABLE>
Welded braces.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kicker773 »</TD></TR><TR><TD CLASS="quote">how much did that cost you if you dont mind me askn? </TD></TR></TABLE>
I got the header for $699 new.
what happend to your an R again?</TD></TR></TABLE>
I sold the AN-R header because I needed to put a/c and p/s back in the car.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by white rocket »</TD></TR><TR><TD CLASS="quote">didn't the ANR crack or something?</TD></TR></TABLE>
It did crack in the past but I had the header completely re-welded at the flange and that issue was taken care of. The header was fine but no a/c.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Padawan »</TD></TR><TR><TD CLASS="quote">Looks like a nice header. Are those functional cross-over tubes, or just welded braces? </TD></TR></TABLE>
Welded braces.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kicker773 »</TD></TR><TR><TD CLASS="quote">how much did that cost you if you dont mind me askn? </TD></TR></TABLE>
I got the header for $699 new.
Joined: Mar 2006
Posts: 370
Likes: 0
From: Florida
Re: Pictures of the Rage big tube 2.0L header (Bradstard)
I was just planning on getting myself one also, but the standard one. 
Quick question, what else should I buy along with the header in conjunction with the exhaust system. I want to get one but I want it to be a bolt-on affair, not too many exhaust shops I know of around here in Jacksonville I'd trust to do some welding.
Quick question, what else should I buy along with the header in conjunction with the exhaust system. I want to get one but I want it to be a bolt-on affair, not too many exhaust shops I know of around here in Jacksonville I'd trust to do some welding.
Joined: Aug 2003
Posts: 10,173
Likes: 0
From: Warning, gRand Return imminent,, NY, USA
Re: Pictures of the Rage big tube 2.0L header (Jon D)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon D »</TD></TR><TR><TD CLASS="quote">and to think you were gonna sell the R ...... </TD></TR></TABLE>
</TD></TR></TABLE>