Searched and didn't Have any luck, Anyone have a link saved or anything?

 

same as any other b series swap, check the faq on the top of the ef forum page or here: https://honda-tech.com/zerothread/1508680
also try searching for b16 or other b engines.

 

how hard did you search? theres shitloads of swap guides for b16 which is basically the same as the ls minus some wiring.

http://www.crxresource.org/mod...d=134

 

Well I wasnt Sure about the wireing that was my only big question I didn;t know if it was wired the same way

 

There are several ways to the wiring. I'm going to tell you the easiest.


Whatever B18a/b you've got, use all obd-0 components.
Get a 90-91 teg pr4 ecu and distributor. It's all plug-in.
Use your CRX Si wiring harness.
The CRX wiring harness is 99% plug-in. You may have to extend one wire or change one plug, but that's it.
Use your stock CRX Si injectors. They all plug in because, duh, you're using the stock Si harness.
That's it...

 

AHH You rock thanks ^^