I recently got hit on my right door, body shop charges too much, I was wondering if I can just get replacement door from any CRX models.

Will they fit? Si to DX ? HF to DX?

Thanks

 

the 88's are a little different from the 89-91

 

so are all the 89-91 the same? regardless of Si DX HF?

 

I believe then 89 hf is different because of seatbelts.

 

that's what i thought too, but i think Si and Dx are the same shoudln't it be?

 

bump thanks

 

all 88s all had pillar mounted belts - the 89 HF had pillar mounted belts - everything else, 89 DX/Si and 90-91 DX/Si/HF had door mounted belts

 

so does that mean Si doors can fit DX?

 

im pretty sure all 88's are the same, the 89 hf is same as 88's, the 89 dx and si are the same and 90-91 are the same, dx hf si.(90-91 will fit a 89 dx or si but they have an extra internal reinforcement so they are not the exact same door)

 

but does switching doors also mean switching keys?

 

ALL 88 models are the same!
89 HF are the same as 88 models

89 DX and SI have door mounted seat-belts
ALL 90-91 have door mounted seat-belts


88s doors (89 HF) will fit on 89-91 cars

89-91 (EX 89 HF) will not fit on 88 cars (and 89 HF) they can but it takes some pounding...


as far as locks? you will need the lock cylinder from whatever door you have the key for...or a decent lock smith can make you a key if you bring them the lock cylinder

 

fyi i have an 88 parts car that has good intrior and a 91 daily driver with pretty bad interior, so i decided to look to see if i could swap the door cards and move the seat belts, ende up that they cept the hole for the seat belt behind the seat for all years, so if you wanted to get an 88 door, just have to get the seat belt and top plastic peices as well. all the holes are there to put the seat belts on.

 

only the driver side has the holes for the seat belt on the pillar though right?

 

if i swap a frost white door to my frost white car, it shouldn't be obvious right? i mean all car paint should be identical right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmef9si &raquo;</TD></TR><TR><TD CLASS="quote">only the driver side has the holes for the seat belt on the pillar though right?</TD></TR></TABLE>
no
I believe the passengerside has the lower bolt hole, but the rest all must be welded on if you want to put pillar mount seatbelts in a doormount chassis

 

Unless the door is more faded or vice versa, but yeah should be cool, better than a black door!