Does anyone know the belt size or model number ?

 

i did the same thing in my sh go to autozone get the belt for the 4th gen h22 prelude that ac was an option on get the one with out it done

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98 blacksh &raquo;</TD></TR><TR><TD CLASS="quote">i did the same thing in my sh go to autozone get the belt for the 4th gen h22 prelude that ac was an option on get the one with out it done </TD></TR></TABLE>

that worked for you?

cause the belts should not be the same....i went to do the same thing and the belt for the prelude with no a/c is to narrow b/c the other pulley is smaller....so unless you are changing pullies or the pullies on 4th and 5th gen are different you need to find the size

i just marked my old belt where it needed to be shortened to and took it to show they guy at the store......you are allowed to return the belt if it's to long/short.....just get the 3 closest sizes for lenght and width is the same as the old belt....then take back the ones you don't need

 

360K6

 

I have the part number, but its out in my car. I'll go get it a little later.

Its a part number for Napa though.

 

36" wouldnt fit on mine. I had to run the 37". 37 was perfect.

just make sure you get the 6 rib.


370k6 at autozone.