Do you have to modify the dome of the piston?

Thanks,
-Mike



Modified by SleepEMike at 6:02 AM 9/4/2006

 

bump, helpp!

 

I think you'll be ok, but to be sure I might pm DonF or another engine builder here on H-T. You might just hafta clay it.

 

i would just clay check it,its not that hard to do just a lil time consuming

 

I have not checked the PCT piston, it looks OK, but you need to check it. PM me the "deck" height.

 

you should be fine i'm running PCT's with a milled p72 head and i have no problems

 

are you running oversized valves?

 

It says he is right in the first post.

 

The stock new OEM Honda head gasket of which I'll be using... do they measure in at .026?


Modified by SleepEMike at 6:03 AM 9/4/2006

 

Me & Mike Will try and check the deck height but I dont have anything very accurate to measure?? I think it was resurfaced tho.


Modified by Serdar at 4:41 AM 6/15/2006

 

you read well my reply was to dohcmonster not sleepemike who i know has oversized valves

 

Well, the cumbustion chamber checked out clear across...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DonF &raquo;</TD></TR><TR><TD CLASS="quote">I have not checked the PCT piston, it looks OK, but you need to check it. PM me the "deck" height.</TD></TR></TABLE>
PM sent


Modified by SleepEMike at 3:54 AM 7/21/2006