FS: Hytech Header (big tube design for high output)
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Aug 2002
Posts: 3,235
Likes: 1
From: Margaritaville, AZ, US
FS: Hytech Header (big tube design for high output)
********SOLD SOLD SOLD***************
<u>For Sale</u>
Hytech "big tube" header for B-series engines
Designed for 2L applications or high output 1.8L
There are two small scratches on two of the primary tubes, they are only cosmetic, and <u>the shape of the primary is not altered in anyway</u>. (almost looks like an abrasion you'd see from rubbing a sanding block over the metal a couple times). This header features Hytech's patentend anti-reversion chambers which are designed to combat the secondary pressure waves that travel back up the primary tube and towards the cylinder during valve overlap. By reducing contamination of the fresh intake charge, these antireversion chambers help boost engine efficiency and make more power. Hytech fabricates their headers using stainless steel tubing and the highest quality TIG welding for maximum durability and appearance. For more info go here: http://www.hytechexhaust.com/
Their header for B-series applications retails for $1,300. A lead time of 2-6 months is typical (I've heard of people waiting even longer than 6 months for their header to be constructed) when ordering these from Hytech. Why wait that long......buy mine and have it on your car now.
I am asking $1,150
Please add $30 for shipping/packing charges.
I accept Paypal (plus 3%) or money order (I will hold MOs 3 days to verify the funds are good).
Buy with confidence, my vouch thread: https://honda-tech.com/zerothread?id=993363&page=1
Modified by BlueTeg at 10:03 AM 11/2/2006
<u>For Sale</u>
Hytech "big tube" header for B-series engines
Designed for 2L applications or high output 1.8L
There are two small scratches on two of the primary tubes, they are only cosmetic, and <u>the shape of the primary is not altered in anyway</u>. (almost looks like an abrasion you'd see from rubbing a sanding block over the metal a couple times). This header features Hytech's patentend anti-reversion chambers which are designed to combat the secondary pressure waves that travel back up the primary tube and towards the cylinder during valve overlap. By reducing contamination of the fresh intake charge, these antireversion chambers help boost engine efficiency and make more power. Hytech fabricates their headers using stainless steel tubing and the highest quality TIG welding for maximum durability and appearance. For more info go here: http://www.hytechexhaust.com/
Their header for B-series applications retails for $1,300. A lead time of 2-6 months is typical (I've heard of people waiting even longer than 6 months for their header to be constructed) when ordering these from Hytech. Why wait that long......buy mine and have it on your car now.
I am asking $1,150
Please add $30 for shipping/packing charges.
I accept Paypal (plus 3%) or money order (I will hold MOs 3 days to verify the funds are good).
Buy with confidence, my vouch thread: https://honda-tech.com/zerothread?id=993363&page=1
Modified by BlueTeg at 10:03 AM 11/2/2006
Trending Topics
Joined: Jul 2005
Posts: 987
Likes: 0
From: GBGizzle, Pa, USA
Re: FS: Hytech Header (acydphryck)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by acydphryck »</TD></TR><TR><TD CLASS="quote">bump for clean header 
</TD></TR></TABLE>
</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Aug 2002
Posts: 3,235
Likes: 1
From: Margaritaville, AZ, US
Re: FS: Hytech Header (JoJo1190)
Thanks fellas. I was halfway tempted to use it on my ITR swapped EG, as John said that it would make great power up top, but sacrifice just a bit of midrange compared to his 1.8L spec header.
TGIF
TGIF
