EDIT: TURBO,MANI, KTELLER DOWNPIPE, ONE ELBOW, OIL LINE STUFF HAS BEEN SOLD LOCALLY

<FONT SIZE="5">IF YOU PAY WITH PAYPAL ADD 3%</FONT>

Well its about time i cleaned out the garage and i had some old parts sitting around that i thought i should finaly get rid of. I want to get rid of this stuff so i will be selling it for really cheap hit me up with offers (all you need is some vaccum lines and charge piping).

<FONT SIZE="4">THE LIST</FONT>
4 X vitara pistons w/ rings, wristpins, c-clips
1 X cruise control module

I also have a synapse missing link never used still in its original bag
Also have a cruise control module, i have no idea how much to sell this for so just hit me up with an offer.

Ohh one last thing i have a set of vitara 75mm pistons, they were installed in a block but later we found out the bock had be overbored, the pistons were never ran just turned over in the motor. I have pictures of each piston, one has a small groove in it barely a 1/4mm deep at the bottom of the skirt, this was from some rubbing because of the piston to wall clearance being to large. All other are fine, it may look like there is a scratch but i couldnt feel it with m hand/nail so i think its just some oil.

They come with wrist pins as well, they are full floating so they accept aftermarket rods. Also it comes with a full set of rings and 7 of the 8 c-clips, i couldnt find one of them, they are like 20 cents so i dont think its a big deal, not a bank breaker
<FONT SIZE="4">PICTURES</FONT>






there is the small scratch, if its unusable you can pick up one piston for real cheap









And pictures of the current beast sans the direct port nitrous


PAYPAL PREFERED, hit me up with offers as i said i will let this go for really cheap, i have been on the forum for around 3 years now and everything will be shipped via fedex ground unlessthe buyer requests something else


Modified by Soccerking3000 at 3:59 PM 4/22/2006

 

ohh i almost forgot to add i am willing to trade for a tial 38mm wastegate plus some cash on the traders part or some 750cc injectors (saturated preferably) thanks again guys

 

bedtime bump

 

I would also prefer to sell the turbo, manifold, wastegate, one elbow, the oil return fitting, oil feed line, and one of the downpipes together.

I'll give you $250 with the dp that is in best of shape

 

300+shipping and its yours i will give you the 2.5" inch downpipe you will gain alot top end wise

 

bump

 

how many miles on the turbo?? are those fins chipped?? i cant really tell one way or the other...weird lighting on that picture. shaft play?? spin free?

 

pm'd

 

pm'ed back

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stackz &raquo;</TD></TR><TR><TD CLASS="quote">how many miles on the turbo?? are those fins chipped?? i cant really tell one way or the other...weird lighting on that picture. shaft play?? spin free?</TD></TR></TABLE>

fins arent chipped they are slightly rough, you can catch your nail on the leading edge but nothing more, spinds freely, doesnt touch the compressor housing at all, the usual side to side play (had the exact side to side play as my brand new t3/t043 57 trim) and it has around 5000 miles on it

 

pending to sohcejcivic till friday

 

pm'd

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soccerking3000 &raquo;</TD></TR><TR><TD CLASS="quote">pending to sohcejcivic till friday </TD></TR></TABLE>

 

PM'd

 

bump

 

bumpo

 

bump

 

you've got a pm about the downpipe!

 

bump 5

 

if ud be willing to just sell the mani let me know

 

bump 6

 

will rade for high cc saturated injectors

 

u got PM

 

pm'ed back

 

greddy downpipe pending till tomorrow with the elbow