i took my m7's apart for some thorough cleaning. i am ready to put them back together but i can't find any info on how much to use on the bolts that hold the two pieces of rims together. if anyone knows i would really appreciate it.

 

i took my mr5's apart and i just used some red loctite and torqued them to 15ftlb and theyve been holding up for almost a year

 

thanks thats what i wanted to know.

 

Careful, I only used 10-12 ft lbs on my MR5 bolts over a year ago, wouldn't want to snap a bolt, impossible to find exact ones. Loctite is very helpful
Measure the thread size, 6mm is approximately 10 ft lbs, 8mm is approximately 15 ft lbs