Well got this car and started the project last year... Then bought a new car and never got back into it to much.

But here it is... I have been working on her again.

91 Civic HB STD model.
B18b motor
Ls tranny
Hasport Mounts & Linkage.
Skunk2 intake manifold ported a bit more.
TB posted to match Intake manifold (aftermarket)

Planning on going turbo soon after I get it bared.

Also DA dash and all intergra wiring.

Dont ask me why I did all the intergra wiring I just wanted to be different. So right now im strippen out the wires I dont need leaving some to maybe do auto door locks. Just trying to clean her up. Also started the wire tuck today on the passenger side. Everyone that says you have to cut the wires is so bsing.... I just unclipped the plugs and ran them. More then long enough.

Sorry for the long speach heres the pics...

 

Nice project, curious to see pics of the DA dash! do you have it mocked up yet?? I'm picking up a '89 CRX DX tomorrow and get to start all over on a project also, even though it's alot of work starting a new project is always fun, makes you always want to improve and top your last build. Good luck w/ this one, I'll stay posted if you keep workin'!

 

looks pretty good,i had to extend my wires for my tuck but i didnt take everything apart either

 

looks like a lot of work..i hate wiring..hopefully you will post pics of the dash soon i'm pretty interested in what it will look like

 

hrm, decided to work on the 4th gen again keith

so far so good

 

yep yep its been sitting so long... parked the scion and got back into the hatch...

heres a pic of the dash I had a pic of it all together but I tore alot of it apart again... to do some more wiring.

 

And yes no heatercore or ac... its a fun daily beater... lol

Oh yea teg wheel too and im doing cruise control on it...

Is that a first? cruise on a hatch?

 

more pics of the engine!

 

its just a b18b right now

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Keith_ &raquo;</TD></TR><TR><TD CLASS="quote">its just a b18b right now</TD></TR></TABLE>

yea but i wanna see it

 

i want to see more pictures of the wire tuck, did you remove/relocate the fuse box thingy?

 

good luck, nice work.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4sd4dr &raquo;</TD></TR><TR><TD CLASS="quote">i want to see more pictures of the wire tuck, did you remove/relocate the fuse box thingy?</TD></TR></TABLE>
Yea you have to... Like I said im in the middle of it so its far from done... Just wanted to show the one side... and how nice it looks and about how you dont have to cut... So many people keep saying on here you have to cut... Just breatk down the protection on the wires and your good so much extrae wire in the car.

 

the rotation of the tire is the wrong way..

but nonetheless good job/luck!

 

Those chrome crappy rims only ones I had laying around to roll the car around... Its got DA front and DA disc in the back with the DC fork up front for that little bit lower stance.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by _Keith_ &raquo;</TD></TR><TR><TD CLASS="quote">
Yea you have to... Like I said im in the middle of it so its far from done... Just wanted to show the one side... and how nice it looks and about how you dont have to cut... So many people keep saying on here you have to cut... Just breatk down the protection on the wires and your good so much extrae wire in the car.</TD></TR></TABLE>
alot of people do things the hard way. but then again, there are no set ways to do a wire tuck, you know?

anyway, i realize its a work-in-progress, mine is too.

I like seeing as many pictures as possible, make sure to heatshrink those wires and **** so they dont chaff against the metal.

 

Yea your right...

As for the wires gonna feed em out some more wrap em up then slide em back in to where they need to be.

 

coolio dude. I love seeing wire tucks....it's just like seeing a well crafted dessert on a clean white plate. For the Injectors? sensors are a bitch and the all mighty loom wrap. Have fun. looking very promising.

 

hope all goes well... id love to rip all mine apart and re-do all the wiring but its my daily and i need it

 

Yea im gonna try some new things when it comes to the engine bay harness...

Never really saw where the engine harness goes to hide it....

 

any updates?

 

any updates

 

Nah been busy at work

 

interesting. um is there a reason for a wire tuck besides the looks? i think they look tight as hell, and wondered how you do it, are all the wires like underneath the engine, hiding in a corner, or what? and um... if ur doing this, wouldnt it be a bitch to like get to the wires if u ever had to fix something that had to do with electricity?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9 CRX si 1 &raquo;</TD></TR><TR><TD CLASS="quote">the rotation of the tire is the wrong way..

but nonetheless good job/luck! </TD></TR></TABLE>

hey i wanted to be the first person to say something about that!


anyway looks like a good project