Did a search, no results. What do you use and where do you get them? Any good/ bad experiances??

Thanks!

 

for GS-R BKR7E gap it to .030 to .032
for LS, BCPR7E same gap

use NGK, cheap, simple, and it works

 

Or also ZFR7F-11's for the LS

 

ttt

 

BKR7EVX-11 gapped to .8mm (.031")

 

Who makes this plug? Sorry if that's a newbie question, but I"ve just always gone with NGKs, and never really researched plugs.

 

NGK-R Platinum. They might be Japan only! I can post a pic of the box if you need it!

 

NGK BCPR7E-11

Works for me

 

if you actually scroll through a few of the pages, youll find a thread that gives you a few websites to where you can order em online for good prices. check it out man.

 

Couldn't find the thread you were talking about. Sorry.

 

http://www.importreview.com/reviews/BoschVSNGK.html
and http://www.importreview.com/reviews/densoVSbosch.html

Bosch 4227 gapped at .035

 

I read on the NGK site that you should go one step colder for every 75-100 hp...if I'm planning on sub 200hp for an EX, I guess I'd just need one range colder, should I change the gap? Anyone?

 

NGK BCPR7E-11 around $2 @ acura dealer

 

Do all hondas/acuras use the same plug? How do I know that plug will fit my car? The reason I ask, is the car parts store behind my apt building can order them for me if I have the right part number. I'm looking for an 89 civic si...

 

http://www.clubplug.net/ will have almost every plug you could want. Order 20 or more plugs at a time to save on shipping. You will be needing to change them more often with FI than stock.

 

NGK BCR8ES, u wont melt these, cheap too. Gap to OEM or .010 less.

 

the kind spark plug depends on what plug they used to tune the car. lots of turbo cars use ngk 7's mine uses 8's for example. i have 300 hp ls

 

thanks for the 6.5yr old bump, and less than .010 gap are you serious?

 

I think he ment .010 smaller than stock, and Damn almost 7year bump, I hope he found what he was lookin for.

 

does the same spark plug and gap apply for a b16?

 

yes b16's are the same, and as for gap, you need to gap accordingly to your setup, everyones is different. mine are gapped to .28 on my b16.