*PARTED OUT*

i'm selling the car as a whole for $6500obo (parts alone list for more than $8000)

94' Honda Civic *SI* black(oxidated) with black interior...
124,000 miles on chasis

Salvage do to suspension bottoming out and scraping the front lower control arm and endlinks of the sway bar...
insurrance said the suspension components would cost more than buying a used 94' SI hence the reason why they salvaged the car...
only the front left side of the suspension was scraped...
Never been hit.. body is straight just in need of paint....

Exterior:
stock oxidized black paint
Spoon JHP replica CF wing
*authentic 1st Gen. Spoon mirrors
EG6 head lights
Eg6 tail lights
Vision amber signal lights
EG6 thin side moldings *Brand New
*Rare* STILLEN front lip *Brand New... looks like Spoon front lip but made in ABS plastic will not crack... ever....
OEM Honda EG rear under diffuser from JHP *Brand New
Honda Access window visors

Interior:
OEM Honda Optional console w/ optional armrest
EG6 defrost button
EG6 hazard button
EG6 power folding mirror switch
EG6 bumper pole switch
EG6 amber clock
EG6 coin tray
EG6 climate control
EG6 gauge cluster FYI black face w/ red needles
EG6 leather wrapped steering wheel
EK airbag tray (dark grey)
ITR shift boot
Del Sol seats (black w/ gray stripe)
Buddy Club shift ****
Alpine deck

Suspension:
ITR front subframe
ITR front sway bar
Gsr rear sway bar
Ground Controls mated to Tokico Illuminas 5 way adjustables
Spoon lower tie bar
*Carbing 3point front strut brace (1st Gen polished finish)
*Carbing 2point strut brace (white finish)
J's Racing C-pillar bar

Enigine:
JDM B18C (GSR) motor with 42,000 mile w/ new water pump, cap, rotor and spark plugs
GSR tranny with LS final drive
Mugen motor mounts
Mugen oil pan
Mugen thermostat
Mugen thermo switch
Hondata intake manifold gasket
Apex'I intake arm with brand new AEM carb number sticker on it
Samco hoses (black)
Spoon Radiator cap
Spoon shift linkage
Power enterprize Timing belt
5Zigen Header
2 1/4 piping mated to stock exhaust
Vision exhaust hangers
ACT lightened flywheel
ACT full face clutch kit
EG6 vin plate

Stoppers:
Slotted Rotors Front and Rear
Project Mu brake pads Front and Rear
Goodridge stainless steel braided brake lines Front and Rear
ITR brake booster


Modified by ATS*JONES at 3:25 PM 3/7/2006


Modified by ATS*JONES at 3:06 PM 4/20/2006

 

why would a car be salvaged from suspension scraping?

 

because of the repair cost of buying Brand new OEM Honda Suspension parts

 

gotcha...too bad its on the title

 

i want the carbing front strut bar. . sell to me. . haha

 

pm u