what thickness of bends to use for turbo mani
Thread Starter
Junior Member
Joined: Nov 2005
Posts: 77
Likes: 0
From: va beach, va, usa
what thickness of bends to use for turbo mani
so what thickness is required to hold it all together well .i have made exhaust systems but this is my first attempt ata manifold
Joined: Jan 2004
Posts: 779
Likes: 0
From: Santa Ana, California 92704
Re: (Oyvind Ryeng)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Oyvind Ryeng »</TD></TR><TR><TD CLASS="quote">Any way to convert those schedules and gauges into metrics?</TD></TR></TABLE>
1.5" s/10 = 1.9" OD x 0.109" wall
1.5" s/40 = 1.9" OD x 0.145" wall
16ga wall = 0.0625" - 0.065" (within tolerance)
14ga wall = 0.083"
Metric:
1.5" s/10 = 48.26mm OD x 2.7686mm wall
1.5" s/40 = 48.26mm OD x 3.683mm wall
16ga = 1.5875mm - 1.651mm (check to see what Euro tolerances are)
14ga = 2.1082mm wall
1.5" s/10 = 1.9" OD x 0.109" wall
1.5" s/40 = 1.9" OD x 0.145" wall
16ga wall = 0.0625" - 0.065" (within tolerance)
14ga wall = 0.083"
Metric:
1.5" s/10 = 48.26mm OD x 2.7686mm wall
1.5" s/40 = 48.26mm OD x 3.683mm wall
16ga = 1.5875mm - 1.651mm (check to see what Euro tolerances are)
14ga = 2.1082mm wall
Thread
Thread Starter
Forum
Replies
Last Post
hondaapi
Welding / Fabrication
4
Jun 29, 2006 09:56 AM