best oil for turbo setup
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GS-R Civic »</TD></TR><TR><TD CLASS="quote">mobil 1 5w30</TD></TR></TABLE>
+1
+1
AMSOIL series 2000, 0w-30w, with Hastings filter. (best filtering that I could find)
I was told by dyno shop owner that Precision recommended not using low viscosity synthetics (0wt,- 5wt etc.) because it would promote leakage around turbo seals. I still use it for better eng. protection. I do have some oil loss.
I was told by dyno shop owner that Precision recommended not using low viscosity synthetics (0wt,- 5wt etc.) because it would promote leakage around turbo seals. I still use it for better eng. protection. I do have some oil loss.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teg racer 877 »</TD></TR><TR><TD CLASS="quote">quaker state "q" 5w-30, full synthetic.</TD></TR></TABLE>
i also use QS "q" ....but i use the synthetic blend
i also use QS "q" ....but i use the synthetic blend
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by btotherizzle »</TD></TR><TR><TD CLASS="quote">switched to mobil 15w-50 from 5w-30 and I stopped losing oil.</TD></TR></TABLE>
That kinda thick
That kinda thick
I use Mobil1 but Im going to switch to AMSOIL 10w30 Turbo Formulated. I want to see for myself if its really better then Mobil1 as far as performance and gas mileage.
Thread
Thread Starter
Forum
Replies
Last Post
Ekcoupeblack
Acura RSX DC5 & Honda Civic EP3
1
Nov 24, 2017 09:56 PM
spoon23_JDizM AkA SpOoN20
Forced Induction
9
Feb 21, 2004 01:48 PM





