Need help to identify what this came out of
Thread Starter
All Motor Mentor
Joined: Aug 2004
Posts: 6,987
Likes: 1
From: 902, Nova Scotia, Canada
Need help to identify what this came out of
I've got this diff sitting here on my work bench and I'm trying to identify what Tranny it came out of. The guy I bought it from said it was out of a GSR transmission but I need to be sure. There's a "PS 1" stamped/cast onto the surface of the diff....any help is appreciated, thanks.
Thread Starter
All Motor Mentor
Joined: Aug 2004
Posts: 6,987
Likes: 1
From: 902, Nova Scotia, Canada
Re: (Screwtape.)
There are 66 teeth on the diff.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nello a. »</TD></TR><TR><TD CLASS="quote">looks like theres some numbers on there but pic is fuzzy</TD></TR></TABLE>
That's where it says P S 1 and then there's a couple symbols cast in too.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nello a. »</TD></TR><TR><TD CLASS="quote">looks like theres some numbers on there but pic is fuzzy</TD></TR></TABLE>
That's where it says P S 1 and then there's a couple symbols cast in too.
Trending Topics
Joined: Mar 2004
Posts: 2,568
Likes: 0
From: Titusville, FL, US
Re: Need help to identify what this came out of (00Red_SiR)
You could count the teeth on the final drive, maybe this would narrow down the possibilities. Although I suppose it could of been swapped to a different final drive along the way somewhere. Bump anyhow for you.
Thread Starter
All Motor Mentor
Joined: Aug 2004
Posts: 6,987
Likes: 1
From: 902, Nova Scotia, Canada
Re: Need help to identify what this came out of (Sam92Teg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sam92Teg »</TD></TR><TR><TD CLASS="quote">You could count the teeth on the final drive, maybe this would narrow down the possibilities. Although I suppose it could of been swapped to a different final drive along the way somewhere. Bump anyhow for you.</TD></TR></TABLE>
Thanks for the bump. The diff has a Phantom Grip installed in it which is why I bought it in the first place, as i was going to install it into my b16 transmission. When I looked into the phantom grip application charts, it shows 2 different part #'s for the phantom grip in the GSR tranny and the b16 tranny. At first I was going to just swap the whole diff into my tranny but now I may be selling my car...either way if I was going to use it or sell it, I need to make sure I know what it will or won't fit. Anyone know if a GSR diff will work in a b16/Civic Si tranny?
Thanks for the bump. The diff has a Phantom Grip installed in it which is why I bought it in the first place, as i was going to install it into my b16 transmission. When I looked into the phantom grip application charts, it shows 2 different part #'s for the phantom grip in the GSR tranny and the b16 tranny. At first I was going to just swap the whole diff into my tranny but now I may be selling my car...either way if I was going to use it or sell it, I need to make sure I know what it will or won't fit. Anyone know if a GSR diff will work in a b16/Civic Si tranny?
Thread
Thread Starter
Forum
Replies
Last Post
jax si
Honda Minivans, Crossovers, and Trucks
18
Apr 7, 2006 02:12 PM
abmerop18
Honda / Acura
6
Dec 25, 2005 06:12 PM