My CRX is dead. Spun bearing.

I have whatever is in the engine bay of my CRX:

'89 ZC motor with spun bearing, timing belt and water pump new. Still runs, but makes knocking spun bearing noises Everything is fine but the bearing.

Head is perfect, will part it out if anyone wants it.

'88 Si transmission (no grinds but makes whirring noises at idle, might be throwout bearing)
Almost new ACT XTSS clutch for '88 Si.
Chikara Headers
Brand new motor mounts
BRAND NEW (just bought from acura for $330!) '89 Integra Distributor
'89 Integra ECU

I said Trinity could buy it, but I really don't want to work on shipping for it... so if you're local I have:

1988 D16A6 complete (with clutch) minus distributor and throttle body

Willing to part out any of the above.

Anyone want any of this? I'm putting an LS in.

Edit:
I also have JDM headlights for the JDM SiR hood, picture below. Make offer.

 

Geographicly where are you located? I may be interested in a few things Like the header. If the price is right.

 

I'm in Sacramento, CA.

Price is best offer. I'm not looking to make a bunch of $$, just want to get rid of the stuff.

 

Here's a pic of the ZC:



Here's a pic of the D16:


JDM Lights:

 

What ever I would get you would have to deal with the shipping since I'm on the east coast near DC. Would you do $100 shipped on the header?

 

Sure. Make sure it's what you want, I posted the pic above.

I'm only concerned with shipping entire motors. Everything else I'll ship. I've shipped headers to the east coast before.

 

how many miles on on that si trans. how are the gears and syncros


[Modified by TorteX, 3:03 PM 3/28/2002]

 

From the picture I assume its a Painted header, and that it isn't rusted to death, or crushed under the pan. I know it isn't a DC stainless header. It is a Si header correct. Not a teg application. So that the CAT bolts up to it in the factory location. And another question, does it have a Oxegen sensor bung on it? I can't see in the picture if it does. And lastly how would we arrange payment?

 

One more question, and please be honest, Did you ever run this with the factory tri-Y ZC manifold and is this reall better or not. I've heard good things and a lot of bad ones about this headeri n the forums.

 

How much for the teg ecu?

 

Yeah, it looks exactly like the picture. It's the Si header. It is painted but it could probably use some more paint It bolts up in the stock location.

I think it has a bung for the O2 below near the cat. The person I bought the car from extended the wires underneath. I can double check. If it doesn't, I can weld a bung on


I'll take anything. Paypal, money order, cashier's check.. etc

 

Hey guy sorry, I just looked the new price up and they go for not much more that. I should have checked first. nLet me reconsider that first. Don't hold up an offer on my account just yet.

 

Honestly, I have never used the ZC stock manifold. The pic is how the car came when I bought it in august. However, I do have the stock ZC manifold if anyone wants it (just the manifold itself)

 

Yeah I thought you were offering a big high That's why I asked you to double check hehe. You can have it for whatever you think is a fair price.

 

Ok there are a FEW DIFFERENT ONES. eXACTLY WHICH ONE IS YOURS. aND IS IT PAINTED OR COATED.. hAVE TO GO RIGHT NOW WILL CHECK WITH YOU LATER.

 

I honestly don't know. Judging by the guy I bought the car from it is probably the cheapest one you can possibly buy.

 

so hows that si tranny?

 

It works fine. Works like a typical Si tranny with 150,000 miles on it. The 88 uses a different number of splines on the clutch disc than the other years, so you'd need either the ACT clutch I have with it... or an '88 clutch.

Dustin

 

hmm would an 88 std clutch fit, or is it too small

 

How much do you want for the distributor? I live in Arizona, so are you willing to ship? Thanks.

 

Consider the Distributor, Spark plug wires, ECU, throttle body, intake manifold, and valve cover sold.

JohnysZC is picking them up next weekend.

Dustin

 

How about $50 and I'll pick it up! I am in Fairfield, CA only like 45min away.
I'm serious too. Let me know, hit me up at technical9@yahoo.com

 

Hmm, $50 for what?

 

oops...sorry, meant for the header.

 

Sure, come pick it up.