As the title says, i'm wondering if anyone is running Scat crank and rods? I'm thinking about running them in a Dart block i'm building. Probably going to go 85x92.

Thanks

 

My roomate runs Scat rods, but not the crank. His rods looked awesome, he's really pleased with the results!

 

Just search for "scat" on google.

 

I've got scat rods in my B18A. they have worked good so far, granted all i have is a 75 shot for now.

 

I have run scat rods in about 15 motors and run 2 of their 95mm cranks in 2 different all motor race engines. I haven't had a problem in any one of them. I definately think that the quality of the crankshafts are very good in comparison to others out there. I personally have had a ton of problems with Eagle cranks and would never run one again or recommend them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ek-CoolGuy &raquo;</TD></TR><TR><TD CLASS="quote">Just search for "scat" on google. </TD></TR></TABLE>

 

Ha ha He said scat rod and crank.

Bad name but seem to be quality products.

 

SCAT is the most under-rated rod out there.

Good stuff if you know how to set your bearing clearances.

 

i run scat rods in my turbo motor and i love them

 

thanks for the smart *** reponses. i wanted to get opinions from people who have used them in their engines before. can't really get that from google.

to everyone else thanks for the reponses.

 

Ask the air-cooled VW guys. Scat is a BIG name in that community.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rochesterricer &raquo;</TD></TR><TR><TD CLASS="quote">Ask the air-cooled VW guys. Scat is a BIG name in that community.</TD></TR></TABLE>

bought some for my build because of my VW experience. Loved them then, still look killer now.

 

Damn, I searched and got some Jap chic crappin on my desktop. And yes that rod looked solid. So , does imbedded corn make the rod stronger.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rocket &raquo;</TD></TR><TR><TD CLASS="quote">SCAT is the most under-rated rod out there.

Good stuff if you know how to set your bearing clearances.</TD></TR></TABLE>

why are you saying that is there aprob with them? i would think bearing clearance would be important with all rods

 

bump

 

scat 95mm crank here in dart talldeck.

the motor isn't running yet (need a head), so I can't say..... I'll post back when it's been running for a while.

 

black r- what rod length are running? bore?