Is this a good deal from golden eagle?
Thread Starter
Honda-Tech Member
Joined: Aug 2001
Posts: 2,195
Likes: 0
From: or
Is this a good deal from golden eagle?
To get your block sleeved will run you $750.00 + shipping and handling .
This includes putting our "Godzilla" sleeves into your block, cleaning
and
decking - Two Options:
1. step deck which is usually for block that do not have enough room for
an o-ring due to large bores
2. O-ring - which we like to put on all motors if possible. Works great
on turbo or NOS cars.
Remember, we use all CNC equipment to do the sleeving portion
of the operation so no one can touch us when it comes to quality,
craftsmanship, tolerances and turn-around. NO ONE!! Plus, our blocks
get pressure tested before they leave to ensure a perfect block every
time!
Quality and reliability are always our top concerns.
We can bore and hone your block but this process is an additional
$125.00, adds 5 - 7 days to the turn around time and we need the pistons
in order to get the process done. I can get you ARIAS pistons for
$515.00 .
Just tell me what your compression preferences are? If you buy the combo
block sleeve, pistons and bore & hone then I can knock your total for
the
job to $1316.00.( a savings of $109 ) Then all you need is someone to
assemble your motor and your off with a lot more reliable power than you
had!!!
This includes putting our "Godzilla" sleeves into your block, cleaning
and
decking - Two Options:
1. step deck which is usually for block that do not have enough room for
an o-ring due to large bores
2. O-ring - which we like to put on all motors if possible. Works great
on turbo or NOS cars.
Remember, we use all CNC equipment to do the sleeving portion
of the operation so no one can touch us when it comes to quality,
craftsmanship, tolerances and turn-around. NO ONE!! Plus, our blocks
get pressure tested before they leave to ensure a perfect block every
time!
Quality and reliability are always our top concerns.
We can bore and hone your block but this process is an additional
$125.00, adds 5 - 7 days to the turn around time and we need the pistons
in order to get the process done. I can get you ARIAS pistons for
$515.00 .
Just tell me what your compression preferences are? If you buy the combo
block sleeve, pistons and bore & hone then I can knock your total for
the
job to $1316.00.( a savings of $109 ) Then all you need is someone to
assemble your motor and your off with a lot more reliable power than you
had!!!
Future Texas Boy
Joined: Sep 2001
Posts: 19,092
Likes: 0
From: SoCal Redneck
Re: Is this a good deal from golden eagle? (infamousRRH)
I just picked up my block from Golden Eagle, they rock. Arias pistons are fine. 2-3 friends are using them in 300 horse daily drivers.
Ryan
Ryan
Junior Member
Joined: Aug 2001
Posts: 509
Likes: 0
From: Irvine, CA, USA
Re: Is this a good deal from golden eagle? (infamousRRH)
I hear that JE and Arias pistons are the way to go...they must be good...but more people seem to prefer JE...and JE's are more known - can't go wrong with JE.
And that Golden Eagle Deal seems pretty good...So they will mill the block to your spec and then sleeve it for you? Is that what all that means? they will smoothen it out, mill it out, and sleeve it...that's awesome if so...I think I'll be going with them, the Godzilla is just too tempting to resist!!!
How large a bore can be had with the B18Cx and H22a engines respectively? I know the first one is about 84-86mm, and the second is probably 3-4mm larger than that...can anyone tell me?
And that Golden Eagle Deal seems pretty good...So they will mill the block to your spec and then sleeve it for you? Is that what all that means? they will smoothen it out, mill it out, and sleeve it...that's awesome if so...I think I'll be going with them, the Godzilla is just too tempting to resist!!!
How large a bore can be had with the B18Cx and H22a engines respectively? I know the first one is about 84-86mm, and the second is probably 3-4mm larger than that...can anyone tell me?
Better than steak
Joined: Jan 2000
Posts: 16,859
Likes: 0
Thread Starter
Honda-Tech Member
Joined: Aug 2001
Posts: 2,195
Likes: 0
From: or
Thread
Thread Starter
Forum
Replies
Last Post
crazyitr
Honda Civic / Del Sol (1992 - 2000)
13
Dec 26, 2003 11:01 AM
Tbone
For Sale
41
Mar 28, 2003 03:01 PM
