Feast your eyes on these beauties. I am just blown away! They are on their way to my house from Canada as we speak. Ram's Horn mani for T3/T4 with 3" Downpipe and recirculating dump for the wastegate for D-series, completely AC and PS compatible. Comments, questions are welcome.

 

That's some nice fab work right there.

 

That's what I said. Very ingenious with the flex pipe there on the recirculating dump tube so as to allow for variations in Tial housing sizes.

Maybe I'm crazy or should get out more, but I have simply never seen anything like it. I can't wait to put this on my car!

 

have fun doing the intercooler piping. looks nice but its a little impractical. i did the flex thing. dosnt help so much now my closed loop dumps are all slip fit

 

have fun doing the intercooler piping, looks like it will be lots of fun on the drivers side

 

Canada represent!! nice stuff

 

Should just use stock intercooler routing from my Drag kit.

 

flippin pimp but i see what they are saying about the I/C piping.....may be a problem hard to tell

 

nah you're gonna have to do some crazy curves. try it. itll just hit the downpipe before you even get it on <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wilky &raquo;</TD></TR><TR><TD CLASS="quote">Should just use stock intercooler routing from my Drag kit.</TD></TR></TABLE>

 

or you can do a same sided intercooler...a top to bottom would be ideal for your setup

 

Well that sucks. The problem for me is that I live in friggin' Tennessee and nobody does any kind of work like that I don't have the welding knowhow to complete such a task. I'll get some kind of response from a local shop like "inter-whooser-whater?" Frickin' rednecks, I'm telling you. If I want anything for my Honda, I have to drive 2+ hours or order it.

Any prefab solutions, fellas?


Modified by Wilky at 7:30 AM 12/10/2005

 

doesn't hybrid901 live in TN and do custom fab or something like that?

 

Damn..that IS nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by paul vang &raquo;</TD></TR><TR><TD CLASS="quote">doesn't hybrid901 live in TN and do custom fab or something like that?</TD></TR></TABLE>

I am not familiar with him. What part of the state, do you know?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wilky &raquo;</TD></TR><TR><TD CLASS="quote">I am not familiar with him. What part of the state, do you know?</TD></TR></TABLE>

https://honda-tech.com/zero...00086

if he doesn't do it, he's sure to know someone local that does

 

Wow that does look pretty nice. Those bends right off the exhaust housing must have been a complete BITCH to fab up and weld.

 

thats some ******* fab work right there! not just nice welding, but some seriously technically hard fab.

 

damn! thats nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 &raquo;</TD></TR><TR><TD CLASS="quote">looks nice but its a little impractical. i did the flex thing. dosnt help so much now my closed loop dumps are all slip fit </TD></TR></TABLE>

so, you were cracking your dump tubes even with a flex pipe?

 

There is just enought room for the Ic pipe along the rad lower rad support to fit things in... if the kit was pictured on a chassis maybe some of us would have different opinions.. reguardless, thanks for the compliments and glad you like it Wilky.

 

damn...that's friggen nice man...where in canada did you get that from?

 

Very sweet lookin

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kwik93si &raquo;</TD></TR><TR><TD CLASS="quote">damn...that's friggen nice man...where in canada did you get that from?</TD></TR></TABLE>

the guy just posted above you . very nice work!


Modified by boostedej1 at 5:01 PM 12/10/2005

 

Looks HOTNESS....
Seen it the other nite couldnt believe wat i was seeing...jay does some wicked work

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point2 &raquo;</TD></TR><TR><TD CLASS="quote">

so, you were cracking your dump tubes even with a flex pipe? </TD></TR></TABLE>

no no no cracking. just its bulky and takes up a lotta space