<FONT SIZE="10"><FONT COLOR="green">SALE</FONT>TILL<FONT COLOR="red">CHRISTMAS</FONT></FONT>

K20A-20,000 Kilometers on the motor
6-speed LSD Tranny 4.7 Final Drive (Y2M3)
ECU (TODA N2 Program)
Alternator
Starter
Clutch(Master cylinder/resevior/hardline/braided steel line)
Flywheel
Intake Manifold
AEM Fuel Rail
Aeromotive FPR
Injectors
Coil Pack
Engine Harness
Comes With All Sensors Needed
<FONT COLOR="red">$5700</FONT>
<FONT COLOR="green">$5600 until christmas!</FONT>
($6000 w/ motor mounts)

K20A EG 4-1 header <FONT COLOR="red">$450</FONT>
(2.5 inch collector)SOLD!

RSX AEM SRI <FONT COLOR="red">$60</FONT>
(Generic filter/no carb sticker)
<FONT COLOR="green">$40 until christmas!</FONT>
DSS Stage 2 Axles for K20/5lug <FONT COLOR="red">$450</FONT>
(450hp)<FONT COLOR="green">$350 until christmas!</FONT>

Apexi VAFC2 <FONT COLOR="red">$220</FONT>SOLD!

CTR 5 lug conversion <FONT COLOR="red">$950</FONT>
<FONT COLOR="green">$700 until christmas!</FONT>(w/ rear disc brake trade)
(semi-new brembo blanks/axxis metalmasters in front)



GAB adjustable dampers eg/ek <FONT COLOR="red">$900</FONT>
<FONT COLOR="green">$850 until christmas!</FONT>

4 front s2000 wheels <FONT COLOR="red">$900</FONT>
(one scratched around very edge, still 8/10) (comes with tires)
<FONT COLOR="green">$8000 until christmas!</FONT>


Note: The ECU is reflashed with TODA N2, so the motor <U>WILL NOT</U> Run unless the ecu is reflashed!! VAFC2 HAS BEEN SOLD!
JL audio XR650 speakers:120 for the set! COMES WITH X-OVERS!
<FONT COLOR="green">$100 until christmas!</FONT>
earls brake lines:80 shipped!
<FONT SIZE="10"><FONT COLOR="green">PACKAGE DEALS!</FONT></FONT>


Motor
6-speed LSD Tranny 4.7 Final Drive (Y2M3)
ECU (TODA N2 Program)
EG motor mounts
Alternator
Starter
Clutch(Master cylinder/resevior/hardline/braided steel line)
Flywheel
Intake Manifold
HEADER HAS BEEN SOLD!
AEM Fuel Rail
Aeromotive FPR
Injectors
Coil Pack
Engine Harness
Comes With All Sensors Needed
VAFC2

<FONT SIZE="5">Special Price $6,350</FONT>
(price reduced because of header sale)

<FONT COLOR="blue">You save:$250</FONT>
Package deal #3(suspension)

GAB Dampers
5 lug conversion
4 front s2000 wheels

<FONT SIZE="5">Special Price $2,600</FONT>
<FONT COLOR="blue">You save:$250</FONT>

Bring it !

PAYPAL IS ACCEPTED! SHIPPING IS AT YOUR COST!

Dboshen@gmail.com/ Honda-tech PM/AIM(derek beau shen) are all acceptable, your choice.
(NOTE ADD 3% FOR PAYPAL FEES IF YOU CHOOSE PAYPAL!!!)

The Civic is for sale also, Its a 1993 Civic Si Painted Silverstone metallic PM me for more details 4,000 OBO CLEAN BODY.


Modified by JUN EK9 at 3:29 AM 12/2/2005


Modified by JUN EK9 at 7:51 AM 12/12/2005


Modified by JUN EK9 at 11:18 PM 12/13/2005


Modified by JUN EK9 at 9:11 PM 12/22/2005


Modified by JUN EK9 at 9:12 PM 12/22/2005


Modified by JUN EK9 at 9:12 PM 12/22/2005

 

where r u located

 

Located in San Diego.

Close to you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JUN EK9 &raquo;</TD></TR><TR><TD CLASS="quote">Located in San Diego.

Close to you </TD></TR></TABLE>

cool, package deal #, whatelse do i need to make it run in my dc4?

 

niiice!!! bump for some good stuff!!!

 

and i was looking for a CTR 5 lug a month ago....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrlover &raquo;</TD></TR><TR><TD CLASS="quote">

cool, package deal #, whatelse do i need to make it run in my dc4?</TD></TR></TABLE>

If you want to run it in a teggy, you need different mounts. As far as the wiring goes, it should be close if not the same. But I'd ask someone who knows more about it...like hybrid-racing. Or go check it out on K20A.org

Im on there, and this exact same thread is too.

 

bump.

good luck on the sale derek.

 

Those mounts will work In a DC chassis.... Why selling Derek??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hndarcrb18c1 &raquo;</TD></TR><TR><TD CLASS="quote">Those mounts will work In a DC chassis.... Why selling Derek??</TD></TR></TABLE>

Here comes the calvary, Thanks for the fact. I didn't know the mounts were interchangable.

Basically getting out of the game before the game comes and steals everything I've got.

I can't enjoy the car the way I wanted to due to cops, theft paranoia, DMV giving me ****, and not being able to track the car as often as i'd like.

I do plan on comming back to the game, just when I have more funds available to do what I want. Its just not feasable at this period of time in my life.

Besides, I'd rather let someone have the motor who can romp the **** out of it, like it was made for, than sit in my garage and rot.

Oh but I will come back to the K-series. It kicks too much ***, and I love it way too much just to walk away from it.

 

Yeah Theft paranioa will kill ya every time!!!... My K-Hatch either sits in the garage or in my shop... Its never out of my eyes range!!! luckly I have a truck to drive.....Good luck with the sale, Im sure you can get 5700.00 for the motor no problem..... Ive ridden in the car that this motor was in and can vouch for it is flawless!!....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hndarcrb18c1 &raquo;</TD></TR><TR><TD CLASS="quote">Yeah Theft paranioa will kill ya every time!!!... My K-Hatch either sits in the garage or in my shop... Its never out of my eyes range!!! luckly I have a truck to drive.....Good luck with the sale, Im sure you can get 5700.00 for the motor no problem..... Ive ridden in the car that this motor was in and can vouch for it is flawless!!....</TD></TR></TABLE>

Thank you kindly sir.

I didn't know you got the K power now, do you still have your drag EG?

 

i'm looking for 5 lug and from fresno, but your price is a little bit high, and im headed to anaheim this coming friday, so if we can work a price, and meet me somewhere near anaheim you got yourself a deal, i can't go all the way to diego, as its gonna tkae me 4 hours to anaheim hehe let me know

 

where was the motor purchased from? how long was it in the swapped car here? was it raced?
thanks
Rhett

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MC_Rhett_Meister &raquo;</TD></TR><TR><TD CLASS="quote">where was the motor purchased from? how long was it in the swapped car here? was it raced?
thanks
Rhett </TD></TR></TABLE>

The motor was purchased from Hmotorsonline, through a 3rd party(the guy who swapped my motor) It was in my car for about 2 years, although I spent a semester up in San Francisco. So it sat in my garage for a bit.

I'm not gonna lie to you, it was raced. Good god man I didnt spend 12 grand+ on this car just so I can take it to car meets and watch all the JDM ****** drool.

Was it abused? No. Stock redline, It was taken to Qualcomm(1/8th) just ONCE, I got 3-4 runs in. This motor/car has also seen the JGTC track, but just for the fan lap. And theres no way I'd drive somewhere without hitting VTEC at least once. If you buy the motor, you'd understand why. But other than that, I just had the best daily driver I could possibly imagine.

 

good bye all mighty motor, you will be missed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Henry HA &raquo;</TD></TR><TR><TD CLASS="quote">good bye all mighty motor, you will be missed</TD></TR></TABLE>


This is the only person to be in my car during a top speed run.
(did it once, and only once.)

7800 RPMs in 6th gear.

 

header has been sold, package prices reduced accordingly.

 

Im shedding a tear for you... I hate parting out projects. One thing that i've found is that it is always best to NOT consider parts a commodity. Best of luck to you. Wish I had 7k for that swap.

 

Dont cry for me, i've shed enough tears for myself. hah, just kidding.

BUT IF U WANT TO MAKE ME FEEL BETTER, IF YOU DONT WANT THIS ****&lt; FIND SOMEONE WHO DOES!

I am trying to get rid of this **** by THIS MONTH, if you dont like my prices, feel free to negotiate, but lowballers will not be responded to.

Thanks,
Derek

 

man you horded some parts, are you sure you wanna quit?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Falkien &raquo;</TD></TR><TR><TD CLASS="quote">man you horded some parts, are you sure you wanna quit?</TD></TR></TABLE>
You dont wanna know what hes gone through

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Henry HA &raquo;</TD></TR><TR><TD CLASS="quote">
You dont wanna know what hes gone through </TD></TR></TABLE>

haha you dont know what ive gone through to make sure he had a ride to get the car when it was finally finished...******* derek j/k! bump mang
Edit: will those rims fit on my moms 2006 corvette?

 

I'm offering 6,000 for the motor package minus the VAFC2(pending sale)


<FONT SIZE="10">JUST FOR TODAY(12/6/05), MOTOR PACKAGE PRICE HAS BEEN REDUCED TO SIX THOUSAND DOLLARS(6,000)</FONT>

I will be bumping this all day long, no offers the deal dissapears. Good hunting.


Modified by JUN EK9 at 1:58 AM 12/7/2005

 

bump for today.