Information.
Please contact me at info@vsracingparts.com With this information if you are inquiring about ordering.

Name,
Address,
Phone
Type of Payment.
We do all types of payment including check by phone.
The only thing we do not take is american express.

Here is the special grand opening deals on tial products

35mm silver andoize .35 or .45 bar will be $234 with shipping inlcuded within the 48 continental states
Effective April 9 we will be raising the price to 234 dollars. All orders prior to the 9th at 11:30am CST time will be 200 all orders after that time frame will be the new price.

Prices will go up by 15% at the end of the month..... so get in while you can.




[Modified by b18bturbo, 10:26 AM 4/9/2002]

 

Wow, those are some killer prices.. Wish I would've known about this a month ago..

-Mike

 

wish i was open back then to serve everyone.

 

Hey b18....what kind of prices do you have on a type s BOV and a DRAG downpipe...or any downpipe that will fit a 92 hatch with a b16a and t3t4...I need both, let me know.

 

How much boost can the high pressure 35mm gate handle?

 

what ever spring you choose it can handle it up to 1.1 bar safely. For over 1.1 bar i would reccommend a 40mm

 

 

when exactly is the cutoff date for this buy??

 

end of this buy will be April 15th 2002 TAX DAY

 

count me in then for a 40 mm tial wg i will have the money to you by late march early april i will send you an email when i have the money,alright??

 

and my birthday

Viren, still got the Z10 stuff on sale? I think I'm ready to buy the kit for my Civic.

 

no big deal. Just please specify what you want in spring sizes. I dont have all springs available in stock so thats why i have to make sure you get the exact spring you want. I carry most of the tial that most of use on daily basis.

 

I want a 40mm wastegate. Can I run 30psi of boost with it? I'll have the money sent to you by the april 15. Let me know i really need it.

 

Yo, I'm DEFINETLY in for the 35 mm. my email is integrajdm@aol.com.

you accept paypal?

 

Is it not possible to run more than 1.5 bar on a 35mm Tial wastegate and if not will the 40mm bolt directly to the drag manifold?

 

i accept paypal but i rather you just use credit card or check to pay through either one is fine though.

 

Thats kewl. Easily run 30psi with it.

 

All you would need is boost controller to adjust it past 1.5 bar. Remember the spring in there will always boost 1.5 then so really i would go with a 1.0 bar 35mm and just get boost controller for anything above that level.

The 40mm will not bolt direct to wastegate you will need a new flange welded on.

 

I might be in for a 35mm wastegate, but I wont know untill after the Garrett group buy. It says the 35mm can handle 1.5bar spring, is this not correct, or do you just suggest the 40mm? I want to boost 9psi for awhile but I will be boosting 15-20psi when everything gets worked out.

 

i would suggest go with a 35mm highpressure with 1.0 bar spring and use boost controller to adjust any more boost. It will flow pretty well. If you plan do some heavy racing or anything go with 40mm or the 46mm which is not listed on this gb

 

On the Drag manifold the hole is 35mm, if you increase the wastegate size to a 40mm and use the flange, are you going to get all the benefits of the 40mm WG? Would boost control be better? or should you just get a manifold with 40mm WG opening?

 

b18bturbo offers some good deals!

 

What is your phone number so i can order on friday???

I will need a 35mm with ? spring

I will be runnung 10-11 psi for now.

can i put the .35 bar spring and let the turbo xs hpmbc do all the work or will i get a better spool time out of a .45 bar spring with the same boost controller???

when can you ship???

thanks
Sean

 

hey what about the 46mm WG .... whats the price on that shipped... thanks

 

Well i have a standard rev-hard manifold. What can i do to install a 40mm wastegate? Can i just put on the 90 degree extension from the manifold and weld it on there?