SpoolinPerformance Tig welded downpipes- Revhard/Drag/Inline Pro/Blox/ OBX
Thread Starter
iTrader: (1)
Joined: Nov 2001
Posts: 45,428
Likes: 0
From: 43257 Osgood Rd. Fremont, CA 94539
SpoolinPerformance Tig welded downpipes- Revhard/Drag/Inline Pro/Blox/ OBX
DOWNPIPES !!!
all prices listed for downpipes are made in mild/ aluminized steel tig welded and fits your setup. Listed are available for B series motors only. D series will need to send manifolds in plus 15$ return shipping+ insurance and a downpipe will be made accordingly within 2 weeks turn around time. keep in mind downpipes are available for 4 and 5 bolt configurations with compressor on either driver or passanger side.
also note- 4 bolt turbine housings have a diffrent placement than 5 bolt turbine housings . Hence, this is why people who put 4 bolt turbos on traditionally 5 bolt manifolds ( revhard, blox, inlinepro, etcc) have found they did some pretty CRAZY ( think, verge of putting a hole in the block) grinding or it simply did not fit in AC traditional configuration. You can only use these turbos with the compressor ( intake side) on the drivers side and route it in an NON-AC fashion. As a result, in doing so this particular mounting style requires the use of a half core honda civic radiator due to placement and angle. something to think about. I tell you this now so i dont have to tell you later.
For the EF guys- if you want a larger downpipe i recommend getting the crossmember from passwordjdm.com or order a 2.5 flared to 3" downpipe that way it will still clear the crossmember and you will get the biggest downpipe that comfortably fits in your vehicle. The downpipe will be flared under the oil pan after the crossmember.
<U> Revhard/ Inlinepro T3 Downpipes</U>
2.5 AC/Non-AC- $150
3" AC- 230$
3" Non-AC- 200$
Stainless wastegate elbow- 60$ shipped ( available for revhard only sorry guys)
Dumptube 50$ ( avail for revhard only )
<U>Drag Downpipes</U>
2.5 AC/Non-AC- $150
2.5 flared to 3" AC- 235$ 2.5 from flange and then flared IMMEDIATLEY right after AC compressor.
3" Non-AC- 200$
Dumptube 50$ shipped
Stainless wastegate elbow 60$ shipped
<U>Blox Downpipes</U>
2.5 AC/Non-AC- $150
3" AC- 230$
3" Non-AC- 200$
Dumptube- 50$ shipped
Stainless Wastegate elbow- 60$ shipped
OPTIONAL
Optional-
2.5" flex pipe-45$
3" flex pipe- 60$
Extra o2 bung+plug- 20$
Closed Loop Dumptube- 80$
STD. Open Loop Dumptube-45$
E-Cutout Modification Spoolin Y pipe design 175$
E-cutout Modification St00pid style- $120
we accept (visa, mastercard, paypal ) <!~~ plus 3% fee's money order, cash.
PM me or email me at spoolindevelopment@gmail.com
Check out our i/c piping and manifold deals !
https://honda-tech.com/zerothread?id=1404253
Garrett/ Turbonetics/ Precision/ Tial specials !
https://honda-tech.com/zerothread?id=1405006
NGK spark plugs at great prices check here !
https://honda-tech.com/zerothread?id=1405006
Modified by project dc2 at 5:00 AM 10/17/2005
all prices listed for downpipes are made in mild/ aluminized steel tig welded and fits your setup. Listed are available for B series motors only. D series will need to send manifolds in plus 15$ return shipping+ insurance and a downpipe will be made accordingly within 2 weeks turn around time. keep in mind downpipes are available for 4 and 5 bolt configurations with compressor on either driver or passanger side.
also note- 4 bolt turbine housings have a diffrent placement than 5 bolt turbine housings . Hence, this is why people who put 4 bolt turbos on traditionally 5 bolt manifolds ( revhard, blox, inlinepro, etcc) have found they did some pretty CRAZY ( think, verge of putting a hole in the block) grinding or it simply did not fit in AC traditional configuration. You can only use these turbos with the compressor ( intake side) on the drivers side and route it in an NON-AC fashion. As a result, in doing so this particular mounting style requires the use of a half core honda civic radiator due to placement and angle. something to think about. I tell you this now so i dont have to tell you later.
For the EF guys- if you want a larger downpipe i recommend getting the crossmember from passwordjdm.com or order a 2.5 flared to 3" downpipe that way it will still clear the crossmember and you will get the biggest downpipe that comfortably fits in your vehicle. The downpipe will be flared under the oil pan after the crossmember.
<U> Revhard/ Inlinepro T3 Downpipes</U>
2.5 AC/Non-AC- $150
3" AC- 230$
3" Non-AC- 200$
Stainless wastegate elbow- 60$ shipped ( available for revhard only sorry guys)
Dumptube 50$ ( avail for revhard only )
<U>Drag Downpipes</U>
2.5 AC/Non-AC- $150
2.5 flared to 3" AC- 235$ 2.5 from flange and then flared IMMEDIATLEY right after AC compressor.
3" Non-AC- 200$
Dumptube 50$ shipped
Stainless wastegate elbow 60$ shipped
<U>Blox Downpipes</U>
2.5 AC/Non-AC- $150
3" AC- 230$
3" Non-AC- 200$
Dumptube- 50$ shipped
Stainless Wastegate elbow- 60$ shipped
OPTIONAL
Optional-
2.5" flex pipe-45$
3" flex pipe- 60$
Extra o2 bung+plug- 20$
Closed Loop Dumptube- 80$
STD. Open Loop Dumptube-45$
E-Cutout Modification Spoolin Y pipe design 175$
E-cutout Modification St00pid style- $120
we accept (visa, mastercard, paypal ) <!~~ plus 3% fee's money order, cash.
PM me or email me at spoolindevelopment@gmail.com
Check out our i/c piping and manifold deals !
https://honda-tech.com/zerothread?id=1404253
Garrett/ Turbonetics/ Precision/ Tial specials !
https://honda-tech.com/zerothread?id=1405006
NGK spark plugs at great prices check here !
https://honda-tech.com/zerothread?id=1405006
Modified by project dc2 at 5:00 AM 10/17/2005
Member
Joined: Jun 2002
Posts: 2,131
Likes: 0
From: Gulf Breeze, FL
Re: SpoolinPerformance Tig welded downpipes- Revhard/Drag/Inline Pro/Blox/ OBX (project dc2)
New thread from Phil w00t. I just gave my downpipe to my powdercoater yesterday so I will post pics in here as soon as I get it back. 
Thread Starter
iTrader: (1)
Joined: Nov 2001
Posts: 45,428
Likes: 0
From: 43257 Osgood Rd. Fremont, CA 94539
Re: SpoolinPerformance Tig welded downpipes- Revhard/Drag/Inline Pro/Blox/ OBX (theo99gsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by theo99gsr »</TD></TR><TR><TD CLASS="quote">I'll be ordering one very soon bump for you..</TD></TR></TABLE>
lookin foward to it sir.
bump for you..</TD></TR></TABLE>lookin foward to it sir.
Trending Topics
Honda-Tech Member
Joined: Jun 2003
Posts: 1,506
Likes: 0
From: United States
Re: SpoolinPerformance Tig welded downpipes- Revhard/Drag/Inline Pro/Blox/ OBX (project dc2)
I'll vouch for this d00d ANY day of the week. Phil gets a from me...GREAT service...THE BEST (yes I said it) fabricator on H-T if you ask me. Excluding the Full-Race robots (both human AND mechanical) of course 
from me...GREAT service...THE BEST (yes I said it) fabricator on H-T if you ask me. Excluding the Full-Race robots (both human AND mechanical) of course
Thread Starter
iTrader: (1)
Joined: Nov 2001
Posts: 45,428
Likes: 0
From: 43257 Osgood Rd. Fremont, CA 94539
Re: (jsnm)
yes for the cast manifolds they're ALL 5 bolt downpip;es. unless you run a 4 bolt in non AC configuration. whatever you need you let me know if i got the manifodl i can make it for you. if not . you can send me your manifold and i can make one for you.