FS: ZC Motor + turbo
10-13-2005, 11:04 PM
#1
Thread Starter
Join Date: Feb 2005
Location: San Diego, CA, USA
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
FS: ZC Motor + turbo
$800
Heres what you're getting:
1.6 SOHC Non Vtec ZC motor + tranny
You'll need axles, ECU and wiring harness.
turbo + manifold
You'll need oil feed line, oil return line, etc
Engine has about 120K. Tranny grinds a bit going into third gear but other than that, I havent had any problems. Also, there is a leak in the valve cover gasket. I'm in the San Diego area and dont mind dropping the motor off if you're not too far; or pickup yourself.... work details out later...
Heres what you're getting:
1.6 SOHC Non Vtec ZC motor + tranny
You'll need axles, ECU and wiring harness.
turbo + manifold
You'll need oil feed line, oil return line, etc
Engine has about 120K. Tranny grinds a bit going into third gear but other than that, I havent had any problems. Also, there is a leak in the valve cover gasket. I'm in the San Diego area and dont mind dropping the motor off if you're not too far; or pickup yourself.... work details out later...
10-16-2005, 08:55 PM
#4
Thread Starter
Join Date: Feb 2005
Location: San Diego, CA, USA
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: ZC Motor + turbo (turboeg_4)
still up for grabs... make an offer-- I want to get rid of this thing!! If you need parts from this motor let me know too... i'd like to sell the whole thing but if i cant get sell it by mid week I'll start partingit out
Trending Topics
10-27-2005, 03:37 PM
#9
Honda-Tech Member
Re: (STREETWERKZ)
specs and pictures again?
is the kit complete? intercooler? piping? charge pipe?
im assuming it is because you said all i will need is an oil return line.
is the kit complete? intercooler? piping? charge pipe?
im assuming it is because you said all i will need is an oil return line.
Thread
Thread Starter
Forum
Replies
Last Post