Removing face on 2 piece wheels
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 1,166
Likes: 0
From: San Jose, California
Removing face on 2 piece wheels
Hey guys, I have a set of SSR Formula Mesh wheels that I wanted to clean up some.. thinking about removing the face. Anyone ever done this? It looks pretty straight forward, but you never know. For those who have done this, did you run into any kind of trouble? These are pretty old wheels so I wouldn't be surprised if the bolts were rusted in place and/or snapped off if you tried to get them off.
Anyway, let me know how it went, TIA!!
Anyway, let me know how it went, TIA!!
Honda-Tech Member
Joined: Feb 2002
Posts: 13,501
Likes: 0
From: Angeles Crest, so cal
Re: Removing face on 2 piece wheels (SRd240sx)
if you do take'em apart, just make sure you retorque them down to correct specs when finished. Alot of the problem is that people aren't sure what to torque them to when done. Since they are old, just go slow, lot of wd40, and make sure you have the right size torx
Honda-Tech Member
Joined: Feb 2002
Posts: 13,501
Likes: 0
From: Angeles Crest, so cal
Re: Removing face on 2 piece wheels (SRd240sx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SRd240sx »</TD></TR><TR><TD CLASS="quote">you have any idea what the specs are for SSR Formula mesh?</TD></TR></TABLE>
no clue. i remember before that me and my friends had disassembled a few SP1's but dont' remember what we retorqued them too. sorry.
no clue. i remember before that me and my friends had disassembled a few SP1's but dont' remember what we retorqued them too. sorry.
Thread
Thread Starter
Forum
Replies
Last Post
b20vtecturbe
Wheel and Tire
2
Jun 28, 2011 06:29 AM
