Red is pump gas on 15 psi Blue is 28 psi and c16

Setup - Motor

-Golden eagle HD sleeved 84 mm Gsr
-Bensons balanced and polished Gsr crank
-Cp pistons
-Full-race / Manley rods
-Headgames MIAMI (not nj) ported cylinder Head with 01 ITR cams
-Edelbrock manifold with STOCK gsr throttle body




Turbo kit

-one fab manifold WITH AC
-2.5 inch downpipe to the cat back 3 inch full thermal exhaust
-GT35R ported shroud T3 turbo with the smaller 2.5 inch precison exhaust housing
-2.5 inch aluminum charge piping- made and tig welded by jdm motorsports in miami
-Tial 50mm BOV
-Turbo smart 38mm WG
-RC 1000s witha walboro 255 in tank and stock lines except for a -6 feed from the filter
-Hondata S300
This was all done on a STOCK IGNITION. msd is crap

Not bad for a Daily Driven car with AC....I built the motor ...
VIDEO: <U>D@nny vs. 06 vette run was on only 17 psi </U>

Right Click, save as

Modified by D@nnY at 1:12 AM 9/27/2005


Modified by D@nnY at 3:29 AM 9/29/2005


Modified by D@nnY at 4:33 PM 9/29/2005


Modified by D@nnY at 12:31 AM 12/16/2005

 

sick #'s

 

on 2.5 exhaust!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ckjeepin &raquo;</TD></TR><TR><TD CLASS="quote">on 2.5 exhaust!</TD></TR></TABLE>

2.5 inch downpipe to clear the ac compressor, then goes to 3"


Would be interesting to see what it would have made on an open downpipe...

 

any pics of the car/setup?

 

nice

 

Nice #'s. What a/r tubrine housing are u running?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dunkd &raquo;</TD></TR><TR><TD CLASS="quote">any pics of the car/setup?</TD></TR></TABLE>

they will be up along with a video tommorow night when we get the cable

 

That's a 450hp steet car.

Nice #'s on C16 though

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dr Pooface &raquo;</TD></TR><TR><TD CLASS="quote">That's a 450hp steet car.

Nice #'s on C16 though </TD></TR></TABLE>

not exactly, its been running around on the street all weekend on 650 whp

 

yes sir


Modified by D@nnY at 12:01 PM 10/12/2005

 

Congratulations dude, well deserved!! Glad someone is getting #'s out of their car!

 

got any pics of this ported shroud gt35r?

 

congrats,Damn thats another one for mase

 

Impressive as usual

 

Nice numbers man... Good street setup...

 

would u care to share the timing maps?

 

very nice, well done setup.

Any upgrades to the fuel pump such as better electrical wires or any of the sort?

 

Just got home, smoked a brand new z06 pretty bad, got a video of it too...

those new z06's are no joke 505 bhp and 470 ft/lbs

and we put many cars lengths on it rather quickly.... on only 18 psi too

post up the video tomorrow...

 

Good work guys

 

wow

 

cant wait for the video

 

Nice tune mase. Rather impressive. Cant wait to see the vids.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mase &raquo;</TD></TR><TR><TD CLASS="quote">Just got home, smoked a brand new z06 pretty bad, got a video of it too...

those new z06's are no joke 505 bhp and 470 ft/lbs

and we put many cars lengths on it rather quickly.... on only 18 psi too

post up the video tomorrow...</TD></TR></TABLE>

Mase you love messing with vettes dont u? Remember when u were street tuning my car and we were messing with that 05 vette too.

 

where is the video.