RMF H22 4 into 1 step piped custom header--virtually new
Thread Starter
Joined: Feb 2004
Posts: 437
Likes: 0
From: Ontario, Canada
RMF H22 4 into 1 step piped custom header--slightly used/ virtually new
HEADER HAS BEEN SOLD !!!
Made by Randy (RMF) at Importpowerhouse.
This header was made to spec.
it has stepped pipes, from 1 3/4" to 1 7/8" into a 2.1" collector
that goes into a megaphone and and into a 3 inch rear exit.
It has 2 bungs located at the proper angle and distance.
It is made for standard block deck height and the factory aluminum pan.
I believe it clears the Moroso pan as well.
It is made to fit in a 92-95 civc.
It makes some serious power....this is what decent cams/head need!
It is ceramic coated. It has a small scrape on the very bottom.
The reason I ams selling this unit is I sold the built allmotor standard deck height H22 this was on....Randy is building me another header that is extra long for the deckplate h22 I have......these are the same type of headers used in our 12.8:1 compression H27 315+ whp engine.
this has no more than a 10 hours of use.
shipped anywhere in the world.
Modified by PocketRockets Racing at 1:51 PM 9/25/2005
Made by Randy (RMF) at Importpowerhouse.
This header was made to spec.
it has stepped pipes, from 1 3/4" to 1 7/8" into a 2.1" collector
that goes into a megaphone and and into a 3 inch rear exit.
It has 2 bungs located at the proper angle and distance.
It is made for standard block deck height and the factory aluminum pan.
I believe it clears the Moroso pan as well.
It is made to fit in a 92-95 civc.
It makes some serious power....this is what decent cams/head need!
It is ceramic coated. It has a small scrape on the very bottom.
The reason I ams selling this unit is I sold the built allmotor standard deck height H22 this was on....Randy is building me another header that is extra long for the deckplate h22 I have......these are the same type of headers used in our 12.8:1 compression H27 315+ whp engine.
this has no more than a 10 hours of use.
shipped anywhere in the world.
Modified by PocketRockets Racing at 1:51 PM 9/25/2005
Thread Starter
Joined: Feb 2004
Posts: 437
Likes: 0
From: Ontario, Canada
Re: RMF H22 4 into 1 step piped custom header--slightly used/ virtually new (PocketRockets Racing)
I have listed it on ebay, if someone feels more comfortable buying it there.
http://cgi.ebay.com/ebaymotors...&rd=1
item #8001291889
http://cgi.ebay.com/ebaymotors...&rd=1
item #8001291889
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
