My EG hatch and CBR are finally for SALE!!!! (Baby on the WAY!!!!)
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 1,918
Likes: 0
From: Las Vegas, NV, USA
My EG hatch and CBR are finally for SALE!!!! (Baby on the WAY!!!!)
****SOLD!!!!!! TO 350ZDAVE****
****EDIT MORE PICS ADDED OF THE EH HATCH!!!! SCROLL DOWN PAGE!****
****ENGINE BAY PICS UP***** SCROLL DOWN PAGE!!!*****
What the locals say about my car!!!!! - http://lvracingscene.com/forum...11041
So as many of you guys know I have a child on the way. So all my childish toys are going away.
First up -
1994 Honda Civic Hatchback
Milano Red
asking - $6500.00
This car is never driven. Its garage kept, and ready for a new owner. No check engine lights or ghetto wiring jobs.
Before the New Bling Bling!!
Engine -JDM b16a (less than 3 months old) with papers from HMO.com
Buddy Club Spec III+ cams
Skunk2 Valve Springs, Retainers
Chipped p28 running custom program
9500 RPM redline
4.7 FD, Action 6 puck Clutch, 10lb flywheel
Short Ram Intake, 4-1 (2.5" Collector), Tanabe GPower Medallion Exhaust, Resonated Test Pipe (Still quiet setup, Silent on the freeways)
Full Wire Tuck!!!!!!
Suspension -
NEX Fully Adjustable Coilovers (retail over $900, Rare!)
ST Sway bars Front and Back
ST Sway bar kit
Beaks Reinforment Kit
Skunk2 Camber kits Front and Back
Neuspeed Strut Tower Bars Front and Back
Skunk2 Lower Rear Tie Bar
Energy Suspension Bushing All Around
ES Shifter Bushing Kit
Wheels - 16 x 7 Rota GT3's Hand Polished (Fully Polished out!!!)
Brand New Dunlop Rubber
Brakes -
Slotted Rotors Front and Back (Rear disk Converted)
Hawk HPS Pads all around
Motul Brake Fluid
Interior -
EX Cluster (9k Redline)
JDM Audio Console
Non air bag dash
Momo Monte Carlo Steering Wheel
Momo Hub
Camp1320 Removable Steering Wheel Adapter
Custom Roll Cage
Crow 4 point Harnesses (3")
Trust/GREX Shift ****
Sony Xplod Speakers All Around
Pioneer Deck not included!!!!
Autometer Shift Light (8k - 9k shift pills included)
Exterior -
CB Duckbill
Wings West Lip
JDM Moldings
Spoon Mirrors
6000k HID kit
Vision Corners
And Next on the For Sale List-
2002 Honda CBR 600 F4i
8500 Miles!!!! Avg = 14500 miles.
Asking - $6000.00
Mods include -
520 Chain Conversion
-1 in the front
Micron High Mount
6000k HID kit
Anodized Pegs, Bar Sliders
Double Bubble Shield
Color Matched Rear Seat
Polished Rims with Painted Centers
Modified by TurbLu at 6:35 PM 9/17/2005
Modified by TurbLu at 6:12 PM 9/18/2005
Modified by TurbLu at 6:12 PM 9/18/2005
Modified by TurbLu at 6:13 PM 9/18/2005
Modified by TurbLu at 1:17 PM 9/19/2005
Modified by TurbLu at 1:33 PM 9/19/2005
Modified by TurbLu at 4:24 PM 9/19/2005
****EDIT MORE PICS ADDED OF THE EH HATCH!!!! SCROLL DOWN PAGE!****
****ENGINE BAY PICS UP***** SCROLL DOWN PAGE!!!*****
What the locals say about my car!!!!! - http://lvracingscene.com/forum...11041
So as many of you guys know I have a child on the way. So all my childish toys are going away.
First up -
1994 Honda Civic Hatchback
Milano Red
asking - $6500.00
This car is never driven. Its garage kept, and ready for a new owner. No check engine lights or ghetto wiring jobs.
Before the New Bling Bling!!
Engine -JDM b16a (less than 3 months old) with papers from HMO.com
Buddy Club Spec III+ cams
Skunk2 Valve Springs, Retainers
Chipped p28 running custom program
9500 RPM redline
4.7 FD, Action 6 puck Clutch, 10lb flywheel
Short Ram Intake, 4-1 (2.5" Collector), Tanabe GPower Medallion Exhaust, Resonated Test Pipe (Still quiet setup, Silent on the freeways)
Full Wire Tuck!!!!!!
Suspension -
NEX Fully Adjustable Coilovers (retail over $900, Rare!)
ST Sway bars Front and Back
ST Sway bar kit
Beaks Reinforment Kit
Skunk2 Camber kits Front and Back
Neuspeed Strut Tower Bars Front and Back
Skunk2 Lower Rear Tie Bar
Energy Suspension Bushing All Around
ES Shifter Bushing Kit
Wheels - 16 x 7 Rota GT3's Hand Polished (Fully Polished out!!!)
Brand New Dunlop Rubber
Brakes -
Slotted Rotors Front and Back (Rear disk Converted)
Hawk HPS Pads all around
Motul Brake Fluid
Interior -
EX Cluster (9k Redline)
JDM Audio Console
Non air bag dash
Momo Monte Carlo Steering Wheel
Momo Hub
Camp1320 Removable Steering Wheel Adapter
Custom Roll Cage
Crow 4 point Harnesses (3")
Trust/GREX Shift ****
Sony Xplod Speakers All Around
Pioneer Deck not included!!!!
Autometer Shift Light (8k - 9k shift pills included)
Exterior -
CB Duckbill
Wings West Lip
JDM Moldings
Spoon Mirrors
6000k HID kit
Vision Corners
And Next on the For Sale List-
2002 Honda CBR 600 F4i
8500 Miles!!!! Avg = 14500 miles.
Asking - $6000.00
Mods include -
520 Chain Conversion
-1 in the front
Micron High Mount
6000k HID kit
Anodized Pegs, Bar Sliders
Double Bubble Shield
Color Matched Rear Seat
Polished Rims with Painted Centers
Modified by TurbLu at 6:35 PM 9/17/2005
Modified by TurbLu at 6:12 PM 9/18/2005
Modified by TurbLu at 6:12 PM 9/18/2005
Modified by TurbLu at 6:13 PM 9/18/2005
Modified by TurbLu at 1:17 PM 9/19/2005
Modified by TurbLu at 1:33 PM 9/19/2005
Modified by TurbLu at 4:24 PM 9/19/2005
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: My EG hatch and CBR are finally for SALE!!!! (TurbLu)
Umm, I actually have an S2K I'm thinking about selling. I've been wanting a bike for a long time, too. I also need a downgrade(financially) because I have a son on the way. Hit me up for details.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 1,918
Likes: 0
From: Las Vegas, NV, USA
Re: My EG hatch and CBR are finally for SALE!!!! (NAallTheWAY)
If I go used with an s2k I want less than 20k on the clock. Im really picky with used cars unless I plan to pull it all apart like my hatch and do a full make-over. Its hard always fixing other peoples mistakes.....
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: My EG hatch and CBR are finally for SALE!!!! (TurbLu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurbLu »</TD></TR><TR><TD CLASS="quote">If I go used with an s2k I want less than 20k on the clock. Im really picky with used cars unless I plan to pull it all apart like my hatch and do a full make-over. Its hard always fixing other peoples mistakes.....</TD></TR></TABLE>
Mine has only 22k and it has not been modded other than springs/wheels. That was followed with a professional alignment. No mistakes here, but I understand where you are coming from. My CRX was trashed when I bought it.
Mine has only 22k and it has not been modded other than springs/wheels. That was followed with a professional alignment. No mistakes here, but I understand where you are coming from. My CRX was trashed when I bought it.
Honda-Tech Member
Joined: Aug 2003
Posts: 1,618
Likes: 0
From: Tucson, AZ, USA
Re: My EG hatch and CBR are finally for SALE!!!! (KillaB-)
another bump for a clean *** eh
how much is removed from the interior?
is the heater still there?
how much work would there be to put a/c back in from doing the wire tuck (assuming you don't have a/c)
how much is removed from the interior?
is the heater still there?
how much work would there be to put a/c back in from doing the wire tuck (assuming you don't have a/c)
Honda-Tech Member
Joined: Apr 2004
Posts: 12
Likes: 0
From: lancaster, ca, united states
Re: My EG hatch and CBR are finally for SALE!!!! (hybrid93SIvic)
hey im really interested in your hatch.. hit me up w/ your number or if you just want to e mail me my e-mail is boarder_fa_life@homtail.com... thanks in advance 
-ryan
-ryan
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 1,918
Likes: 0
From: Las Vegas, NV, USA
Re: My EG hatch and CBR are finally for SALE!!!! (hybrid93SIvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrid93SIvic »</TD></TR><TR><TD CLASS="quote">another bump for a clean *** eh
how much is removed from the interior?
is the heater still there?
how much work would there be to put a/c back in from doing the wire tuck (assuming you don't have a/c)</TD></TR></TABLE>
It is full interior with armrest and backseats still. Heater Core is still installed and working, we have cold winters here in LV. AC wouldnt be much work, just add lines, compressor and go. The 2 AC plugs are still accessible in the engine bay.
how much is removed from the interior?
is the heater still there?
how much work would there be to put a/c back in from doing the wire tuck (assuming you don't have a/c)</TD></TR></TABLE>
It is full interior with armrest and backseats still. Heater Core is still installed and working, we have cold winters here in LV. AC wouldnt be much work, just add lines, compressor and go. The 2 AC plugs are still accessible in the engine bay.
Honda-Tech Member
Joined: Aug 2003
Posts: 1,618
Likes: 0
From: Tucson, AZ, USA
Re: My EG hatch and CBR are finally for SALE!!!! (TurbLu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurbLu »</TD></TR><TR><TD CLASS="quote">
It is full interior with armrest and backseats still. Heater Core is still installed and working, we have cold winters here in LV. AC wouldnt be much work, just add lines, compressor and go. The 2 AC plugs are still accessible in the engine bay. </TD></TR></TABLE>
thanks for the quick reponse bro
any engine bay pics?
i am in the market for my third civic...and i have been looking into another coupe...
but your hatch is so damn clean and makes me miss mine
so i will let you know
It is full interior with armrest and backseats still. Heater Core is still installed and working, we have cold winters here in LV. AC wouldnt be much work, just add lines, compressor and go. The 2 AC plugs are still accessible in the engine bay. </TD></TR></TABLE>
thanks for the quick reponse bro
any engine bay pics?
i am in the market for my third civic...and i have been looking into another coupe...
but your hatch is so damn clean and makes me miss mine
so i will let you know
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 1,918
Likes: 0
From: Las Vegas, NV, USA
Re: My EG hatch and CBR are finally for SALE!!!! (hybrid93SIvic)
As you guys can see... C L E A N!!!! The block is also painted alluminum silver. Alot of Time and Money was placed into this car. I couldnt have done it without alot of help from Gambit (EK Squad) and my other friends.
THE FLUIDYNE RAD is not included in this deal.
THE FLUIDYNE RAD is not included in this deal.
Honda-Tech Member
Joined: Aug 2003
Posts: 1,618
Likes: 0
From: Tucson, AZ, USA
Re: My EG hatch and CBR are finally for SALE!!!! (TurbLu)
good lord
that is real clean
clean title?
i will let you know bro...hopefully you still have this in a week or so..
my pm's are down so e-mail me
i would really appreciate it
hybrid93sivic@yahoo.com
that is real clean
clean title?
i will let you know bro...hopefully you still have this in a week or so..
my pm's are down so e-mail me
i would really appreciate it
hybrid93sivic@yahoo.com
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 1,918
Likes: 0
From: Las Vegas, NV, USA
Re: My EG hatch and CBR are finally for SALE!!!! (hybrid93SIvic)
emails sent...
pms sent....
Please no more trade offers for Family Vehicles... LOL... We all ready have out daily beater. Unless you have a low mileage s2k I wont be interested...
thanks
Andrew
pms sent....
Please no more trade offers for Family Vehicles... LOL... We all ready have out daily beater. Unless you have a low mileage s2k I wont be interested...
thanks
Andrew