These are the Home Depot Specials that I put together. Should fit '94-01 Integra's(please correct me if I'm wrong). I was forced to buy like 6 or 8 feet of the thin wall PVC(the straigt piece pictured) so that will produce atleast 6 or 7 of these intakes and I really don't need all the leftover pipes laying around. I have one on my car and the one pictured available now. Make me a reasonable offer if your at all interested, I have a small business and am Paypal Verified and prefer paypal or money orders, will ship anywhere and ship out the same day or following day of receiving payment.
I'll throw in a few ZIP ties to secure it into place, by situating the upper thin wall PVC into the stock airbox that alone actually holds the whole thing pretty solidly in place, the Zip ties just kind of add a bit of security. Installation is extremely simple, just pull out the stock resonator and "plug" this right in.
Post here or email if interested, I can put together as many kits as needed.
The Butt dyno feels some pretty good mid-range pull with this installed even with the stock filter. I actually owned the Icebox for literally a day before I found out these can be built for a fraction of the cost and the performace appeared(again to the butt dyno, not a great tool to use) to be identical.
Thanks.
Mark




This one just shows the bottom of the stock airbox connected:

This is what it looks like with the Turn Signal removed:



[Modified by 01ITR#700, 9:59 AM 2/28/2002]

 

can u make 1 for an eg w/teg (itr) airbox? how much?

 

hey man, i'm interested, but how much are you asking for em?

 

I'd like to get $37 shipped out of each one. I ship via USPS Two Day Priority mail and will supply Delivery Confirmation #'s after they ship so you know basically when to expect it. I'll gladly ship to Canada too, you just have to tack on $6 extra. I hope that price doesn't sound high, but I use an actual rubber coupler to connect the thin wall to the 1st elbow, and I use an actual 3" to 4" extension to widen the intake opening, rather than a speaker port or something like that.

slofu, I'm not sure if it will fit an EG w/ an ITR air box and I don't have any vehicle nearby to test one on. If you happen to find out if they are close or similar then it may work as is. The lower pipes are a bit "adjustable" for different angles if that helps at all.
M
Thanks for the interest, I build custom intakes for Monte Carlo's, Lumina's, Grand Prix's, Beretta's, and other domestics if you guys know anybody looking. These cars have no after market and the aftermarket thats available is way overpriced comapred to me. Some examples:

 

hey man i'm very interested. i have a double charge from jc whitney that i have to get situated and then i'll be contacting you. ill keep in touch.

 

ttt

 

WHAT....JC WHITNEY...WHAT KIND OF RICE YOU BUYING THERE......j/k

 

black lugnuts and b&m short shifter

oh and some red neons and led windshield squirters


[Modified by spankaveli, 11:15 AM 3/1/2002]

 

how much u getting the short shifter at jc whitney at?...i hope it isnt a high *** price haha

 

round 59 or somethin, anyway, back on topic. TTT

 

i got mines for $45 ..

 

ttt
New Price is $35 shipped in the US, $42 shipped to Canada...
Thanks.
Mark


[Modified by 01ITR#700, 7:08 AM 3/4/2002]

 

hey man, are you positive this will work with the stock gsr airbox i.e is the bottom hole same size as the itr? If so you have a buyer

 

I can actually say I'm not 100% sure(never actually checked) but I have been told it will fit '94-01 Integra's since the stock airbox is apparently the same.
HTH, Perhaps someone can verify this for us?
Mark

 

you could just ship it to me, if it fits ill pay you if not i send it back

 

Sounds good. Then if it fits, I'll buy one.

 

I've never looked at a GSR and ITR air box side by side but many have told me that the only different is the resonator.