I just finished searching on this topic, but would still like a few people's opinion.

While at Expo5, MikeHonda got to take my ITR out on the course. After taking it out for a session, he told me that I was going to need a new clutch sometime in the future. I was also in need of a new 3-4 Synchro set. I am not sure on the 3-4 Synchro set's part # for my ITR.

I think I have found it, but not sure if this is for another DC2, like the GSR. The part number I have come up with from searching is this:

23623-P21-315


Len... if you can check this or know it right off hand, It would be greatly appreciated.

Also, if anyone has a picture of what exactly is included in this, could you please post up a picture?

And again, MikeHonda, Thanks for all the Help! I would like to hear of what all happened since your return to SoCal after the disaster.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ryan_C &raquo;</TD></TR><TR><TD CLASS="quote">Also, if anyone has a picture of what exactly is included in this, could you please post up a picture?
</TD></TR></TABLE>

includes synchro hub/sleeve
brass synchros (2)
synchro springs (2)

 

ryan, if your going to opt for a specific synchro replacement, then its just wise to replace all of them at once. My opinion

 

That is the part number I am holding one in my hand right now.

 

Thanks D!

Kayos: I don't think that's a bad idea if I can get the parts for fairly cheap.

01usjdmr: Is this what you had in your hand?



Anyone know where I can pick up the 1-2 and the 5-R Synchro sets really cheap?


Modified by Ryan_C at 8:25 PM 9/1/2005

 

What does it run?

 

Some members have had luck with http://www.gear-speed.com/home.html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KayOs &raquo;</TD></TR><TR><TD CLASS="quote">Some members have had luck with http://www.gear-speed.com/home.html</TD></TR></TABLE>

Brass synchro rings only. Hub/sleeve not included.

OEM honda synchro kits canot be had for 'cheap'

 

D,

Is that the complete kit in the picture I posted, if it's truely #23623-P21-315?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ryan_C &raquo;</TD></TR><TR><TD CLASS="quote">

Is that the complete kit in the picture I posted, if it's truely #23623-P21-315?</TD></TR></TABLE>

Anyone???

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ryan_C &raquo;</TD></TR><TR><TD CLASS="quote">D,

Is that the complete kit in the picture I posted, if it's truely #23623-P21-315?</TD></TR></TABLE>
Not 'D', but 'W' here... the 23623-P21-315 (sleeve set 3-4) is what you have posted above in picture form.

I have the Honda box sitting in my garage with some used bits in it (not from my tranny).

 

LET ME KNOW IF YOU ARE IN NEED. I give HT discounts. Willard is that the stuff from robs tranny ?

 

that it is.

 

Mine?

 

the other rob...

 

About to say, no one in their right mind would want parts from my tranny.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by who00knows &raquo;</TD></TR><TR><TD CLASS="quote">LET ME KNOW IF YOU ARE IN NEED. I give HT discounts. Willard is that the stuff from robs tranny ? </TD></TR></TABLE>

if you can sell the 1/2 synchro set for somewhere around $200, or front wheel bearings for $25, or rear wheel bearings without the hub assembly... i'm in need right now.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D &raquo;</TD></TR><TR><TD CLASS="quote">

if you can sell the 1/2 synchro set for somewhere around $200, or front wheel bearings for $25, or rear wheel bearings without the hub assembly... i'm in need right now. </TD></TR></TABLE>

I sale new parts not used parts. Those prices are WAY below dealer cost!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by who00knows &raquo;</TD></TR><TR><TD CLASS="quote">

I sale new parts not used parts. Those prices are WAY below dealer cost! </TD></TR></TABLE>

yeah, you said discount, hook a brotha up.

 

 

Well, I guess Len would most likely hook a brutha up. Give him a call.

 

I was going to give him a deal, but the prices he is requesting LEN cant sale for, because he pays more than that for them. That was my point. I give a discount just like LEN does.

List Price on the wheel bearing is $73.30.
You cant order the rear bearing without the hub.
List price for 1-2 Synchro is $365.05.

Requesting a bearing for 25 dollars or a synchro set for 200 and a part that isnt available.

I will sale the wheel bearing for right at $55.00
The 1-2 Synchro set for $290.00

Maybe even better depending on the circumstance.

 

I got two thumbs down. Sweet.

 

Just trying to help out.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by who00knows &raquo;</TD></TR><TR><TD CLASS="quote">I was going to give him a deal, but the prices he is requesting LEN cant sale for, because he pays more than that for them. That was my point. I give a discount just like LEN does.

List Price on the wheel bearing is $73.30.
You cant order the rear bearing without the hub.
List price for 1-2 Synchro is $365.05.

Requesting a bearing for 25 dollars or a synchro set for 200 and a part that isnt available.

I will sale the wheel bearing for right at $55.00
The 1-2 Synchro set for $290.00

Maybe even better depending on the circumstance. </TD></TR></TABLE>

The 1-2 Synchro set for $290.00

DAMN! Is that cheap? The guys at Gear-speed quoted me 1-5 + bearings and seals for like $500.

I don't know **** about the 'carbon' coated synchros, but the kit they offer includes carbon coated 3-5.

Not trying to bust your *****, who00knows.