The "Where Can I get" this thread.
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 14,296
Likes: 1
From: Charleston, SC
The "Where Can I get" this thread.
Everyday I see another "Where can I find" something thread.
This will be the official thread to ask where you can find something. Please respond with answers and I will later sift through the info and make one giant thread of resources for hard to find parts/components.
Let's get this ball rolling
p.s.
This is NOT a wanted bad thread. Make a post saying "I need XXX, hit me up" and you will be docked points.
This is not also a thread for WHERE CAN I FIND THIS FOR CHEAP.
This will be the official thread to ask where you can find something. Please respond with answers and I will later sift through the info and make one giant thread of resources for hard to find parts/components.
Let's get this ball rolling
p.s.
This is NOT a wanted bad thread. Make a post saying "I need XXX, hit me up" and you will be docked points.
This is not also a thread for WHERE CAN I FIND THIS FOR CHEAP.
Honda-Tech Member
Joined: Oct 2000
Posts: 7,126
Likes: 1
From: Culpeper, VA
Joined: Jun 2005
Posts: 3,241
Likes: 0
From: The Wizard Of Oz, State Rd 1505, Section 8
Honda-Tech Member
Joined: Mar 2005
Posts: 18
Likes: 0
From: that one place, dunno, usa
Re: (mgags7)
i had the same problem and made a adapter bracket to bolt the shaft to the sh block from a pice of 1/4 plate steel measured like 4 by5 and measured the holes in the shaft bracket and then tapped those holes then drill the holes is the plate for the block... insert shaft to trans and then slide plate in to be bolted into place.. i was told that it would never work but its been in there for almost 15000 miles and ALOT of dragstrip time and no problems yet...
Honda-Tech Member
Joined: Jul 2003
Posts: 304
Likes: 0
From: Q.C., AZ, US
Re: The "Where Can I get" this thread. (PrecisionH23a)
Where can I get....Or do they make?
The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield.
I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood.
Does anyone klnow if there are any Kits or is it just custom fabrication???
The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield.
I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood.
Does anyone klnow if there are any Kits or is it just custom fabrication???
Trending Topics
Honda-Tech Member
Joined: May 2005
Posts: 135
Likes: 0
Re: The "Where Can I get" this thread. (Geeq)
I think I have seen what you are talking about. The car I saw with it just did it his self with longer bolts and washers as spacers. You can't raise it much if you want the latch to still work right.
Member
Joined: Oct 2002
Posts: 4,768
Likes: 1
From: Flowery Branch, Ga
Re: The "Where Can I get" this thread. (Geeq)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Geeq »</TD></TR><TR><TD CLASS="quote">Where can I get....Or do they make?
The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield.
I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood.
Does anyone klnow if there are any Kits or is it just custom fabrication???</TD></TR></TABLE>
Ace Hardware/Fastenal. Get longer bolts and a handful of washers and go to town.
The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield.
I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood.
Does anyone klnow if there are any Kits or is it just custom fabrication???</TD></TR></TABLE>
Ace Hardware/Fastenal. Get longer bolts and a handful of washers and go to town.
space cadet
Joined: Nov 2002
Posts: 6,091
Likes: 0
From: Spec Shakesland
Re: The "Where Can I get" this thread. (Geeq)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Geeq »</TD></TR><TR><TD CLASS="quote">Where can I get....Or do they make?
The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield.
I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood.
Does anyone klnow if there are any Kits or is it just custom fabrication???</TD></TR></TABLE>
JDM? if anything its SoCalDM.
its a metal dowel cut about 3/4 of an inch or however far you want. however be careful, 1 - it looks like **** on ludes, 2 - its easy to break a window (done it myself), however it does let tons of heat out of the engine bay.
The mounts for your Stock or OEM style hoods that can be lifted where the hood meets the windshield.
I've seen it Searching for Pics of cars. It's a JDM style that you don't see here in the US...so I've heard. It creates a sort of Cowl induction by lifting the hood up an inch or two still using your stock hood.
Does anyone klnow if there are any Kits or is it just custom fabrication???</TD></TR></TABLE>
JDM? if anything its SoCalDM.
its a metal dowel cut about 3/4 of an inch or however far you want. however be careful, 1 - it looks like **** on ludes, 2 - its easy to break a window (done it myself), however it does let tons of heat out of the engine bay.
Member
Joined: Jul 2003
Posts: 1,858
Likes: 0
From: Florida, us
Re: (IAluder95)
Q) Were can I get a adapter plate to mount a D-series tranny on a h22?
A) http://www.bisimoto.com/wst_page10.html
A) http://www.bisimoto.com/wst_page10.html
Member
Joined: Jun 2004
Posts: 1,117
Likes: 0
From: Clemson, SC, United States
Re: (PreludeWhore)
(Q)where can I find a deck plate/torque plate for honing?
(A)www.f22parts.com
(Q)where can I find JDM fogs, headlights, corners, etc.?
(A)www.passwordjdm.com
(Q)Where can I get a beef and bean burrito?
(A) Taco Bell, duh
(A)www.f22parts.com
(Q)where can I find JDM fogs, headlights, corners, etc.?
(A)www.passwordjdm.com
(Q)Where can I get a beef and bean burrito?
(A) Taco Bell, duh
Joined: May 2003
Posts: 347
Likes: 0
From: Austin, TX
Joined: May 2003
Posts: 347
Likes: 0
From: Austin, TX
Re: The "Where Can I get" this thread. (jd3jdm)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jd3jdm »</TD></TR><TR><TD CLASS="quote">where can you find some polyurethane aftermarket motor mounts?</TD></TR></TABLE>
inlinefour.com
inlinefour.com
Joined: May 2003
Posts: 347
Likes: 0
From: Austin, TX
Re: The "Where Can I get" this thread. (jd3jdm)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jd3jdm »</TD></TR><TR><TD CLASS="quote">If you are talking about the energy suspension ones, they aren't mounts, just inserts. I'm looking for the whole mount.</TD></TR></TABLE>
They sell both there. Mounts and Inserts
http://www.enjoracing.com/engine_mounts_swap.html has some.
They sell both there. Mounts and Inserts
http://www.enjoracing.com/engine_mounts_swap.html has some.
