I have searched on this using different phrases but no luck

My question is that I want to use Db8 door handles ( 4- door ) the ones without the keyhole and but them on my gsr for a clean look...this should work especailly having power locks so when I want my door to unlock I just press my keypad and there you go...am I correct or do I need stupid door poppers and the only problem I see having is if my alarm goes off...usually you can put the ign key in the drivers key hole and turn and it turns off...but you should be able to use the keypad...right???

 

it will work with no poppers, if you battery dies u will have to climb in thru the trunk to get into the car though

 

does anyone have a DIY thread on this???

 

Just remove your DC2 door handle, and connect the latch rod on the DB8 handle when you install it into your DC2 door. All you're doing is eliminating the key cylinder and the rod that connects to it. Your power door locks will function as usual, no worries.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by diversegsr &raquo;</TD></TR><TR><TD CLASS="quote">... and the only problem I see having is if my alarm goes off...usually you can put the ign key in the drivers key hole and turn and it turns off...but you should be able to use the keypad...right??? </TD></TR></TABLE>

The keypad will disarm the alarm.
No Door Poppers Needed.

 

thanks for explaining it...should be easy...weekend project