K SERIES.... (socal) 56k sorry, its not my fault.
i am selling a 98.2% complete type s change over. the change over is in need of a build up or rebuild.
the money you save on taking this route will allow you to build a better change over then the k series type-r.
i am asking $2200.00 the price is like fake *******... very firm. here are pics of all that is included.
also the head is from a k20a (type-r) as well as the throttle body. the harness is american type s.




head needs valve job, as well as having the first chamber cleaned up.
but no damage that cannot easily be repaired.


number 1

number 2

number 3

number 4

the reason that the block needs to be rebuilt, well the motor dropped a valve. the valve was only able to poke a hole into the piston,
it did not make its way into the bottom end to do any damage. instead it stayed up top and got lodged into the head.
that is why the type s head was replaced with the type r head.



tranny's blingin dawg.
the shift assembly (type-s plastic one) is also included but not pictured.
Modified by SoCaLNaTIvE at 11:06 AM 7/16/2005
the money you save on taking this route will allow you to build a better change over then the k series type-r.
i am asking $2200.00 the price is like fake *******... very firm. here are pics of all that is included.
also the head is from a k20a (type-r) as well as the throttle body. the harness is american type s.




head needs valve job, as well as having the first chamber cleaned up.
but no damage that cannot easily be repaired.


number 1

number 2

number 3

number 4

the reason that the block needs to be rebuilt, well the motor dropped a valve. the valve was only able to poke a hole into the piston,
it did not make its way into the bottom end to do any damage. instead it stayed up top and got lodged into the head.
that is why the type s head was replaced with the type r head.



tranny's blingin dawg.
the shift assembly (type-s plastic one) is also included but not pictured.
Modified by SoCaLNaTIvE at 11:06 AM 7/16/2005
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JdM DA InTeGrA »</TD></TR><TR><TD CLASS="quote">Give me a dollar
</TD></TR></TABLE>
mee too!
bump for a **** price K
</TD></TR></TABLE>mee too!
bump for a **** price K
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JdM DA InTeGrA »</TD></TR><TR><TD CLASS="quote">Give me a dollar
</TD></TR></TABLE>
</TD></TR></TABLE>
Trending Topics
seriously interested...there is nothing missing right? besides having to fix the piston and one cylinder on the head? ecu included? where in so cal are you located? take paypal? thanks


