NEW Turbonetics T3/T4 turbo kit with intercooler complete $1750 for ls gsr b series
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,731
Likes: 0
From: northeast, tn, usa
SOLD!!
pics are gonna be left up till the guy receives the kit
1st OF ALL -THIS IS NOT!! MY EBAY AUCTION listed below! SOMEONE STOLE MY PICTURES AND TEXT OFF HONDA-TECH AND IS TRYING TO RIP SOMEONE OFF!!!!
http://cgi.ebay.com/ebaymotors...20093
ebay finally took care of it after i reported it, the high bidder actaully got ahold of me and is buying it
here's my description, ligit and all=
BRAND NEW!!
NEW PRICE!!
$1750!!!
TAKING OFFERS! NEED TO MOVE THIS KIT OUT THE WAY !
Will part out!! must line up buyers asap, ONLY after all parts are spoken for from buyers,will i determine that YES its being parted out
PM me for offers on particular parts, remember this is NEW stuff, not used, so dont offer USED prices.
parted out broken down list:
quik sol had shown interest in the following:
-manifold, turbo, and downpipe, oil line /vacuum line kit
that leaves
all new of coarse)
-turbonetics deltagate wastegate mark II with the different color springs(for boost settings)
-hks racing bypass valve with instructions
-Spearco FMIC core is 20x8x3.5
-Powdercoated IC piping for 94+ LS with all clamps/connectors
-K&N air filter with 18" flex duct/hose
-factory LS headgasket disassyblied and a thick copper middle added (for lower compression)
This kit is $3399 on turbo-kits.com(FMAX), where this kit came from, only i dont have any fuel management (injectors, fmu, that stuff) So many people run aem's, uberdata, or hondata, so I'll let you take care of the fuel managment. So take $3399 and subtract the cost of fuel injectors, fmu, and a msd timing retard box, and you wont be down near $1750
its boxed up and can be shipped, 60lbs, plus a another box for the intercooler..it came UPS, so i should be able to mail it back to someone UPS.
AC Freindly! Here's the details, small pictures shown, there's links with BIG pictures if you need to see anything in detail. Intercooler piping is designed for a LS/ITR, and gsr with skunk2 manifold. .I'm normally a N/A person, so my turbo knowledge is quite limited. You can check my bio and see my vouches, i've sold sime big ticket items, such as 3 cars on honda-tech. Also i have the same name on ebay, over 135 feedback, all 100%.
List of Parts:
-Turbonetics Polished Turbo , measured the wheels -intake side is 57mm and tapers out to 65mm hole, the exhaust side has about a 55mm wheel
48 is stamped inside the exhaust inlet,
-supposed to be a "V" stage 2 .48 A/R
(should be ceramic ball bearing turbo, i'm not sure though)(new kits come that way, but this one has set in the stock room for a year)
-Spearco w.a.v.e frontmount intercooler, core is 20x8x3.5"
-Powdercoated Intercooler/charge pipeing with all clamps and couplers
-turbonetics turbo manifold(thermocoated)
-turbonetics deltagate wastegate( with differentl colored springs for different boost settings)
-dump tube
-HKS racing bypass valve
-Lower Compression Head gasket (factory LS with thick copper center section
-mandrel bent downpipe -black thermo coated
-K&N air filter
-18 inch air intake flex pipe, if you want the filter further away from the turbo
-complete oil line kit, pressure side and return kit
-vacuum line kit and 5 way Tee
-gasket between turbo and manifold
Comes with general honda/acura turbo kit installation instructions






this kit also available at jegs, heres a mock up picture

BIG pictures
ex side of turbo http://www.we-todd-did-racing....D.jpg
intake side of turbo http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
Modified by darrinbrewer at 8:05 PM 7/24/2005
Modified by darrinbrewer at 3:40 PM 7/26/2005
pics are gonna be left up till the guy receives the kit
1st OF ALL -THIS IS NOT!! MY EBAY AUCTION listed below! SOMEONE STOLE MY PICTURES AND TEXT OFF HONDA-TECH AND IS TRYING TO RIP SOMEONE OFF!!!!
http://cgi.ebay.com/ebaymotors...20093
ebay finally took care of it after i reported it, the high bidder actaully got ahold of me and is buying it
here's my description, ligit and all=
BRAND NEW!!
NEW PRICE!!
$1750!!!
TAKING OFFERS! NEED TO MOVE THIS KIT OUT THE WAY !
Will part out!! must line up buyers asap, ONLY after all parts are spoken for from buyers,will i determine that YES its being parted out
PM me for offers on particular parts, remember this is NEW stuff, not used, so dont offer USED prices.
parted out broken down list:
quik sol had shown interest in the following:
-manifold, turbo, and downpipe, oil line /vacuum line kit
that leaves
all new of coarse)-turbonetics deltagate wastegate mark II with the different color springs(for boost settings)
-hks racing bypass valve with instructions
-Spearco FMIC core is 20x8x3.5
-Powdercoated IC piping for 94+ LS with all clamps/connectors
-K&N air filter with 18" flex duct/hose
-factory LS headgasket disassyblied and a thick copper middle added (for lower compression)
This kit is $3399 on turbo-kits.com(FMAX), where this kit came from, only i dont have any fuel management (injectors, fmu, that stuff) So many people run aem's, uberdata, or hondata, so I'll let you take care of the fuel managment. So take $3399 and subtract the cost of fuel injectors, fmu, and a msd timing retard box, and you wont be down near $1750
its boxed up and can be shipped, 60lbs, plus a another box for the intercooler..it came UPS, so i should be able to mail it back to someone UPS.
AC Freindly! Here's the details, small pictures shown, there's links with BIG pictures if you need to see anything in detail. Intercooler piping is designed for a LS/ITR, and gsr with skunk2 manifold. .I'm normally a N/A person, so my turbo knowledge is quite limited. You can check my bio and see my vouches, i've sold sime big ticket items, such as 3 cars on honda-tech. Also i have the same name on ebay, over 135 feedback, all 100%.
List of Parts:
-Turbonetics Polished Turbo , measured the wheels -intake side is 57mm and tapers out to 65mm hole, the exhaust side has about a 55mm wheel
48 is stamped inside the exhaust inlet,
-supposed to be a "V" stage 2 .48 A/R
(should be ceramic ball bearing turbo, i'm not sure though)(new kits come that way, but this one has set in the stock room for a year)
-Spearco w.a.v.e frontmount intercooler, core is 20x8x3.5"
-Powdercoated Intercooler/charge pipeing with all clamps and couplers
-turbonetics turbo manifold(thermocoated)
-turbonetics deltagate wastegate( with differentl colored springs for different boost settings)
-dump tube
-HKS racing bypass valve
-Lower Compression Head gasket (factory LS with thick copper center section
-mandrel bent downpipe -black thermo coated
-K&N air filter
-18 inch air intake flex pipe, if you want the filter further away from the turbo
-complete oil line kit, pressure side and return kit
-vacuum line kit and 5 way Tee
-gasket between turbo and manifold
Comes with general honda/acura turbo kit installation instructions






this kit also available at jegs, heres a mock up picture

BIG pictures
ex side of turbo http://www.we-todd-did-racing....D.jpg
intake side of turbo http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
http://www.we-todd-did-racing....D.jpg
Modified by darrinbrewer at 8:05 PM 7/24/2005
Modified by darrinbrewer at 3:40 PM 7/26/2005
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,731
Likes: 0
From: northeast, tn, usa
up for sat. night crew, taking ANY OFFERS..except way lowballin
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,731
Likes: 0
From: northeast, tn, usa
this has been up for 2 weeks almost..someone needs a nice turbonetics kit!
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,731
Likes: 0
From: northeast, tn, usa
up, for taking ANY cash offers, possibly some used rocket all motor cams too


