I was wondering what do I have to do to fit BB1/BB4 Prelude seats in my EK. Can I just swap the rails or do I have to do some drilling and cutting? Thanks.

 

https://honda-tech.com/zerothread?id=1271192
https://honda-tech.com/zerothread?id=998846

There you go

 

I have these seats in my EK, I shall post some pics as soon as the car comes back from the shop. I used a combination of EK/Prelude brackets to make the seat fit. You need the bracket that holds the seat belt clip from the EK and the other bracket from the Prelude and some really long bolts, locking nuts and some washers.

It is do-able, and looks sweet, although mine will be going soon as I have ITR Recaro's going in as soon as I finish making my custom low sitting brackets (being tall is not easy in an EK)

- Prob

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xtremeazian &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=1271192
https://honda-tech.com/zerothread?id=998846

There you go</TD></TR></TABLE>

man, that second thread was worthless...

 

Ok well I decided not to get them because they require too much fabrication which I don't have the money and time for. Thanks again.