Hello,

I've decided I have too many projects, and am selling all of the parts I have for my CRX project. Pretty much had a complete LS powered CRX ready to be built.

OK the parts:

I have a 1990 B18A motor, I removed the head(it was fine, its a long story, got scammed on a junk head)..so, selling the bottom end as a short block. Would be excellent for a LS-VTEC motor, or put the stock head back on it. Compression was 180 psi to 185 psi on all 4 cylinders. Ran great, approximately 90k miles.

$150 for the shortblock, $200 total I'll include the stock head, cams, intake, injectors, etc.

B18A Starter: $35 shipped

B18A OBD0Alternator $35 shipped

B18A stock Head (assembled, in good condition) $40 + ship

B18A stock cams make offer

B18A Intake with sensors/t-body $25 + ship

B18A Injectors/rail $30 shipped

5 Speed LS transmision, cable shifted (from the same car as the above engine.) Doesn't grind that I remember. These early LS trannys are supposed to have the lower final drive than the later hydro trannys, and has the best overdrive. $200, plus shipping.

Crane stage 2 #12 cams for B18A, should be good for ~12-14hp, moves the powerband up about 500rpm. No valvetrain mods needed. Used for a couple thousand miles. $200 shipped

1990 CRX-Si Engine Wiring harness used with B18A motor above: $40 shipped (Includes various sensors)

LS axles from the above transmission: $75 shipped

PR4 ECU from the above engine: $40 shipped

Exedy Organic Clutch + pressure plate for cable B-series transmission(the one above it fit), used a few thousand miles, $85 shipped.

All 3 taillights(left/center/right) from a 1990 CRX Si, decent condition, SOLD

JG Edelbrock adjustable cam gears for any B-series motor: brand new, SOLD

Stainless DC sports header for a GS-R, will fit any B-series motor. Used, SOLD!!

Seat brackets from CRX Si(from both front seats, total of 4 brackets): SOLD

LS Distributor (ODB0) from above engine: SOLD

I have a 1989 CRX Si for sale for $400 HERE-> https://honda-tech.com/zerothread?id=1262429, includes neuspeed springs and full exhaust.. SOLD

I probably have other parts as well, as I find them, I'll add them here.

I accept paypal, add 4% for paypal fees.

If you want pics of a certain item, let me know exactly what you want, and I'll snap the pics. Provide an email address to send them to.

Thanks!
Haggar


Modified by haggar at 10:15 AM 6/11/2005


Modified by haggar at 5:12 PM 6/11/2005


Modified by haggar at 5:13 PM 6/11/2005


Modified by haggar at 10:59 PM 6/15/2005


Modified by haggar at 7:32 AM 6/16/2005


Modified by haggar at 7:34 AM 6/16/2005


Modified by haggar at 11:59 AM 6/16/2005


Modified by haggar at 9:59 PM 6/21/2005


Modified by haggar at 9:42 PM 6/23/2005


Modified by haggar at 9:53 PM 6/24/2005


Modified by haggar at 9:58 PM 6/26/2005

 

bump

 

Pics of the adj. cam gears?

 

Here's a pic, not the best, its always had to photograph shiny metal...They have never been used.

http://www.lordsofevolution.co...s.jpg

 

would u part the head? i want just the cam shafts. let me know thanks

 

ttt!

 

bump!

 

ttt

 

bump

 

bump!

 

semi interested in your crane cams and adj cam gears. pm sent.

 

interested in cam gears do u take paypal?

 

pm'd you..

 

cam gears are sold...

 

bump

 

bumpo

 

ttt

 

ttt

 

up

 

bump

 

Hey what's up!!! I'm practically next door to you here in Oxford! Interested in the DC header, do you have pics or anything? Is it 4-2-1 or 4-1...1-piece or 2-piece? Also what is the collector diameter? Thanks, let me know I need to buy one this week to get my swap in!

 

pm'd you back..

 

ttt

 

what year CRX are those seat brackets out of?

 

1990 CRX Si...