OBD2 Secondary o2 Sim Question
Thread Starter
Honda-Tech Member
Joined: Mar 2004
Posts: 15,050
Likes: 3
OBD2 Secondary o2 Sim Question
Im about to put an obd2 p14 back into my 96 si so i can go pass inspection, i have no secondary o2 at all though.
I read the faq thread on the o2 install, and gathered that a 1kohm resistor should be put between the two heater (black) wires if there is no sensor at all....
Can anyone confirm that this works? I dont wanna fry my ecu.....
thanks
I read the faq thread on the o2 install, and gathered that a 1kohm resistor should be put between the two heater (black) wires if there is no sensor at all....
Can anyone confirm that this works? I dont wanna fry my ecu.....
thanks
Honda-Tech Member
Joined: Jan 2004
Posts: 452
Likes: 0
From: united states of mexico and yes ladies i am, available
Re: OBD2 Secondary o2 Sim Question (98HB)
i was goin to do that but im afraid of wireing things near my ecu so just got the plug and play one instaled in 5 seconds and still no problems
Honda-Tech Member
Joined: Jun 2004
Posts: 684
Likes: 0
From: Little Falls, NY, US
Re: OBD2 Secondary o2 Sim Question (raylude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mgags7 »</TD></TR><TR><TD CLASS="quote">bump it up</TD></TR></TABLE>
Can you link me to the site where you got it? Thanks.
Can you link me to the site where you got it? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Cyphear
Tech / Misc
12
Dec 14, 2005 09:59 AM
B-twentyVTEC
Honda Civic / Del Sol (1992 - 2000)
3
May 16, 2005 12:30 PM
