Here's what I have for sale:

-<U>SOLD!</U>Cast CRX HF manifold - Great Shape $45
-<U>SOLD!</U>HF Mani Adapter plate for Mitsu turbo (14b, T25, 16g) - THICK!!! like 3/4". This thing DEFINITELY won't break. $20
-Mitsubishi 14b turbo - Guy I bought it off of recently had it rebuilt apparently. Very little shaft play. Wastegate actuator is polished and turbo is nice and shiny from me polishing most of the compressor side. There are a couple of small cracks in the exhaust port, but this is normal for Mitsu turbos and it won't hurt a thing! Supposed to be set at 5.5lbs but I never ran it so I cannot guarantee anything. Also has the factory J 2" pipe so you can mount it up to the IC piping. Also has a DSM o2 in it the exhaust elbow. $175
-2.5" IC piping - Some is polished, some isn't. I have a 4' straight section and 2 nice u bends. $70
-Front Mount Intercooler - Ends tanks are semi polished. It's about 28" x 6" x 2.5". Great shape, never used, I bought it new. Inlet is 2", outlet is 2.5". $200
-<U>SOLD!</U>DSM 1g BOV - This thing is pretty sweet. This is supposed to be a VERY loud BOV. It is mounted on a 2" pipe. $45
-<U>SOLD!</U>Autometer Gauges - Mechanical boost gauge and mechanical oil gauge. I have installed them in my car, but they aren't hooked up yet. $90
-96-00 Civic Bezel Dual Gauge Pod - Has two pods to hold the gauges and bolts right around the factory gauges. $30
-<U>SOLD!</U>Custom Downpipe - This mounts up to the factory exhaust elbow from the Mitsu turbo and has a flange for the factory exhaust. Kinda rigged. Needs to be welded. $40
-Missing MAP Link - Only has one of the screws with it, but I do have the unit itself. $45
-Odds and ends - Some random vacuum lines. I also have a TON of old T25 parts. Compressor and Exhaust housings. Wastegate actuator. Exhaust elbow with o2 plug. I have a couple of 2.5" clamps and 2" couplers that might help you out, also. $75

The only thing needed to complete this is some good fuel management, some random fittings like couplers and clamps, 10 ft. of vacuum hose, and some oil lines. Its all small and you could probably snag the rest for under $200 easily. Hit me up on PM or in this thread. Thanks a bunch guys.

Pics:


Other old T25 parts (Compressor Housing, Exhaust Elbow, Wastegate Actuator)



Random Piece of 2" IC piping with Couplers

This would work well as an intake pipe for your filter.


2.5" IC Piping

This stuff is BRAND NEW! Never been put on the car or pulled out the plastic for that matter. You can see my polishing job on the 4' section. It's not the greatest job, but it still looks really good.
(Deodorant does not come with the kit)


14b Turbo





You can see the crack in that last picture. Like I said, its nothing major and it shouldn't hurt a thing.


Intercooler


There you go. If you have any questions, please contact me.


Modified by Mistamike17 at 6:00 PM 4/27/2005


Modified by Mistamike17 at 6:37 PM 4/27/2005


Modified by Mistamike17 at 5:37 PM 5/1/2005


Modified by Mistamike17 at 6:18 PM 5/1/2005


Modified by Mistamike17 at 10:04 PM 5/1/2005


Modified by Mistamike17 at 10:05 PM 5/1/2005


Modified by Mistamike17 at 11:47 AM 5/2/2005


Modified by Mistamike17 at 8:13 PM 5/4/2005


Modified by Mistamike17 at 8:14 PM 5/4/2005

 

pm'd

 

replied... morning bump.

 

Bump

 

Triple T.

 

Once again...

 

Downpipe pending...

Make offers on what you want. If I can sell most of it parted out, then I will.

 

Bump before class.

 

And the after class bump.

 

downpipe sold to me

 

Downpipe shipped bump.

 

Sleepy time bump

 

Morning bump.

 

Afternoon bump.

 

hey $25 shipped for the adapter plate check you IM

 

PM replied. Adapter Plate pending.

 

sending the money tomorrow

 

Bump... hittin the sack.

 

Bump in the morning.

 

Bump for those Friday night lookers.

 

bump cause i sent you a PM

 

PMS replied. Bumpalicious.

 

hey sending the money tomorrow check your IM

 

PMs replied. Bump again.

 

$30 shipped for the bov, or a little more for the bov still attached to the center section of piping? hit me up preferably on AIM

AIM: phd sews
email: ericmeye@colostate.edu

thanks!

~eric