Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05
04-24-2005, 06:33 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: NORCAL
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05
H22+YS1+1775lbs=11's
Well, we did it. First pass 11.97@113 on an internally unmodified JDM H22 longblock right out of the trailer. 60 ft. 1.69.
Second run, 1.59 60 ft., half track 94 MPH....and then silence. We were on a pace to an 11.6 run. Crank pulley bolt backed out along with the key and we bent a few valves. We just finished pulling the head, all 16 valves bent. That's racing.
The plate works wonders! The YS1 GSR gearing appears optimal for our setup. Again, this is a bone stock motor. No Type S anything.
We will have some pics of the setup up soon!
Well, we did it. First pass 11.97@113 on an internally unmodified JDM H22 longblock right out of the trailer. 60 ft. 1.69.
Second run, 1.59 60 ft., half track 94 MPH....and then silence. We were on a pace to an 11.6 run. Crank pulley bolt backed out along with the key and we bent a few valves. We just finished pulling the head, all 16 valves bent. That's racing.
The plate works wonders! The YS1 GSR gearing appears optimal for our setup. Again, this is a bone stock motor. No Type S anything.
We will have some pics of the setup up soon!
04-24-2005, 06:59 PM
#3
Member
Join Date: Feb 2004
Location: NORCAL/WA/TX
Posts: 1,196
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (Bserious)
saw you guys out there today; your first run looked really clean. it looked you might have tree'd ole erick on that one 
anyway, have you tried this out on any other chassis's yet? i'm using DA mounts in my ef, and have been waiting for you release a little more info on your plate. stock B mounts right?
anyway, have you tried this out on any other chassis's yet? i'm using DA mounts in my ef, and have been waiting for you release a little more info on your plate. stock B mounts right?
04-24-2005, 07:01 PM
#4
Honda-Tech Member
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (SpdFrk)
nice time for a stock block... since the motor is comin out build up the bottom end and go faster 
good luck this season
since the motor is comin out build up the bottom end and go faster good luck this season
04-25-2005, 06:43 AM
#7
Honda-Tech Member
Join Date: Feb 2000
Location: Milwaukee, WI
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (Bserious)
Finally! I've been following this for years!
BTW, it's weird how your crank bolt backed out, since the same thing happened on my H22 (it was an H22a4) too. And on PO.com, there are a few guys who had the same problem?
Are you guys selling the adapters?
BTW, it's weird how your crank bolt backed out, since the same thing happened on my H22 (it was an H22a4) too. And on PO.com, there are a few guys who had the same problem?
Are you guys selling the adapters?
Trending Topics
04-25-2005, 07:04 AM
#8
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (Finest)
I checked out this kit and have nothing but good things to say about it. Very well fabricated and still utilizes stock B series axles and intermediete shaft. I can't wait to get my hands on a kit.
04-25-2005, 07:11 AM
#9
Honda-Tech Member
Join Date: Feb 2000
Location: Milwaukee, WI
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">I checked out this kit and have nothing but good things to say about it. Very well fabricated and still utilizes stock B series axles and intermediete shaft. I can't wait to get my hands on a kit.
</TD></TR></TABLE>
Link?
</TD></TR></TABLE>
Link?
04-25-2005, 07:19 AM
#10
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (Finest)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Finest »</TD></TR><TR><TD CLASS="quote">
Link? </TD></TR></TABLE>
No link that I am aware of.
Link? </TD></TR></TABLE>
No link that I am aware of.
04-25-2005, 07:24 AM
#11
Join Date: Apr 2002
Location: Dynotuner.net, 2JZGTE
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (Finest)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Finest »</TD></TR><TR><TD CLASS="quote">
Link? </TD></TR></TABLE>
Link? </TD></TR></TABLE>
04-25-2005, 08:48 AM
#13
Honda-Tech Member
Join Date: Nov 2003
Location: Kitchener, Ontario, CANADA
Posts: 5,986
Likes: 0
Received 2 Likes
on
2 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (Bserious)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bserious »</TD></TR><TR><TD CLASS="quote">H22+YS1+1775lbs=11's
Well, we did it. First pass 11.97@113 on an internally unmodified JDM H22 longblock right out of the trailer. 60 ft. 1.69. </TD></TR></TABLE>
GOOD. JOB.
Well, we did it. First pass 11.97@113 on an internally unmodified JDM H22 longblock right out of the trailer. 60 ft. 1.69. </TD></TR></TABLE>
GOOD. JOB.
04-25-2005, 09:13 AM
#14
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (2point2)
lets finally get some pricing on this things and what ALL is needed to make it work. forget going down the track. race RMF to get this into production first...
04-25-2005, 09:23 AM
#15
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (hybridvteceg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridvteceg »</TD></TR><TR><TD CLASS="quote">lets finally get some pricing on this things and what ALL is needed to make it work. forget going down the track. race RMF to get this into production first...</TD></TR></TABLE>
He is trying to sell a kit that works....going down the track proves that it DOES WORK. This kit is worth the wait.
He is trying to sell a kit that works....going down the track proves that it DOES WORK. This kit is worth the wait.
04-25-2005, 10:31 AM
#18
Junior Member
Join Date: Jan 2003
Location: Ingersoll, Ontario, Canada
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Ive experianced similiar things happening to my JDM H22 aswell.. and when I orderd a crank pulley bolt fomr the dealer, it was the wrong size.. 3X... so I used the old one and loctite it in there with alot of power, and it hasnt moved yet...
04-25-2005, 07:52 PM
#20
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: NORCAL
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (hybridvteceg)
Track time is not the only factor. Working with the U.S patten office is a time consuming process. Submittial is ready to go. The kits availablity should be the end of June. Works with DA, DC, EG, EK, and EF. Email me for pricing.
Thanks again Lo. You time and efforts have assisted us immensely.
Thanks again Lo. You time and efforts have assisted us immensely.
04-25-2005, 08:36 PM
#21
Honda-Tech Member
Join Date: Nov 2003
Location: Kitchener, Ontario, CANADA
Posts: 5,986
Likes: 0
Received 2 Likes
on
2 Posts
Re: (crazykid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crazykid »</TD></TR><TR><TD CLASS="quote">Ive experianced similiar....... </TD></TR></TABLE>
you should buy this adapter plate.
you should buy this adapter plate.
04-26-2005, 05:09 AM
#24
Honda-Tech Member
Join Date: Sep 2003
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (93H22ACX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX »</TD></TR><TR><TD CLASS="quote">which egine's clutch, flywheel, and starter are you using?</TD></TR></TABLE>
with everything being equaly space , he is running the stock b series starter .
with everything being equaly space , he is running the stock b series starter .
04-26-2005, 05:16 AM
#25
Join Date: Apr 2002
Location: Dynotuner.net, 2JZGTE
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
Re: Townsend Bros. H2B Adapter Plate.... 11.97 Stock Block H22 CMI 4-24-05 (lovitalracer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lovitalracer »</TD></TR><TR><TD CLASS="quote">
with everything being equaly space , he is running the stock b series starter . </TD></TR></TABLE>
so b series starter with h22 clutch and flywheel? sorry for my ignorance about this setup. just wan to know. thanks
with everything being equaly space , he is running the stock b series starter . </TD></TR></TABLE>
so b series starter with h22 clutch and flywheel? sorry for my ignorance about this setup. just wan to know. thanks